Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Silicone Spray
- Product Form
- Mixture, Aerosol
- Product Code
- 09.20.10
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- V800-30GS-600C-PV25
Identified Uses
Lubricants
Uses advised against
No additional information available
Manufacturers & Suppliers
Kroon-Oil B.V.
manufacturer
Dollegoorweg 15, NL 7602 EC Almelo, Netherlands
0031 (0)546 81 81 65
Emergency Contacts
National Poisons Information Centre, Beaumont Hospital
+353 1 809 2566
24/7
National Poisons Information Centre, Beaumont Hospital
+353 1 809 2166
8am - 10pm, 7/7
National Poisons Information Service (Cardiff Centre), University Hospital Llandough
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Symptoms: Although no appropriate human or animal health effects data are known to exist, this material is expected to be an inhalation hazard.
Wash skin with plenty of water.
Symptoms: Repeated exposure may cause skin dryness or cracking.
Rinse eyes with water as a precaution.
Symptoms: None under normal conditions.
Do not induce vomiting. Call a physician immediately.
Symptoms: Risk of lung oedema.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Do not use a heavy water stream.
Combustible liquid. Extremely flammable aerosol. Pressurised container: May burst if heated.
Fight fire from safe distance and protected location. Do not enter fire area without proper protective equipment, including respiratory protection.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if safe to do so. Notify authorities if product enters sewers or public waters. Absorb spillage to prevent material damage. Ventilate spillage area. No open flames, no sparks, and no smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. Evacuate unnecessary personnel.
Notify authorities if product enters sewers or public waters.
Absorb spillage to prevent material damage.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapours/spray.
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Store locked up. Store in a well-ventilated place. Keep container tightly closed.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Type: Reusable gloves, Material: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes), Thickness (mm): ≥0.35, Standard: EN ISO 374
Safety glasses. Type: Safety glasses, Field of application: Droplet, Characteristics: clear, Standard: EN 166
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Extremely flammable aerosol. Pressurised container: May burst if heated.
No dangerous reactions known under normal conditions of use. Reacts violently with (strong) oxidizers.
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Silicone Spray?
The signal word is danger.
What is the physical form of Silicone Spray?
Silicone Spray is a liquid appearing as aerosol. with colourless. color. It has characteristic. odor.
What is the solubility of Silicone Spray?
Water: Insoluble / Slightly miscible
What is Silicone Spray used for?
Lubricants
What are the hazard statements for Silicone Spray?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Silicone Spray?
The melting point is Not applicable and the boiling point is > -44 °C.