Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Luconyl® Yellow 0911
- Product Code
- 30277530
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Colorants for the Paints, lacquers and varnishes industry
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
+49 621 60-45891
Emergency Contacts
International emergency number
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation based on: pigment, in water/solvent C.I. Pigment Yellow 3
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C.I. Pigment Yellow 3 | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention.
Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth and then drink plenty of water.
Medical Treatment
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, dry powder, foam
harmful vapours, Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective clothing.
For residues: Pick up with suitable absorbent material.
For large amounts: Pump off product.
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.
Pump off product. Pick up with suitable absorbent material.
Materials: suitable absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures necessary provided product is used correctly. Protect against heat.
Keep container tightly closed and in a cool place. Store protected against freezing.
No special precautions necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Due to the colouring properties of the product closed work clothes should be used, to avoid stains during manipulation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
No hazardous reactions when stored and handled according to instructions.
No special precautions other than good housekeeping of chemicals.
No substances known that should be avoided.
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Luconyl® Yellow 0911?
The signal word is no signal word.
What is the physical form of Luconyl® Yellow 0911?
Luconyl® Yellow 0911 is a liquid appearing as liquid yellow with yellow color. It has product specific odor.
What is Luconyl® Yellow 0911 used for?
Colorants for the Paints, lacquers and varnishes industry
What are the hazard statements for Luconyl® Yellow 0911?
This substance has 2 hazard statements:
- EUH070: The product does not require a hazard warning label in accordance with GHS criteria.
- EUH209: The product does not require a hazard warning label in accordance with EC Directives.