Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SF F720 YL known as Color Guard® Yellow Tough Rubb
- Product Code
- 338133
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), light distillate hydrotreating process, low-boiling | 68410-97-9 | 10 - 30% | Yes |
| Naphtha (petroleum), hydrotreated light | 64742-49-0 | 10 - 30% | Yes |
| Solvent naphtha (petroleum), light aliph., <0.1% benzene | 64742-89-8 | 10 - 30% | Yes |
| Xylenes | 1330-20-7 | 10 - 30% | Yes |
| n-Hexane | 110-54-3 | 10 - 30% | Yes |
| acetone | 67-64-1 | 10 - 30% | Yes |
| Ethylbenzene | 100-41-4 | 5 - 10% | Yes |
| Octane | 111-65-9 | 1 - 5% | Yes |
| n-Heptane | 142-82-5 | 1 - 5% | Yes |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
| Cumene | 98-82-8 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Wash clothing before reuse. If symptoms develop and persist, get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, extinguishing powder, carbon dioxide.
Not available.
Vapours may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Remove all sources of ignition. Ensure adequate ventilation. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and clothing. Avoid breathing vapors or mists of this product. Keep away from heat, spark and flame.
Store at or below 48 °C (118.4 °F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Avoid contact with skin and clothing.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Strong oxidizing agents. Strong acids and strong bases.
Oxides of carbon. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1139
- Shipping Name
- Coating solution
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SF F720 YL known as Color Guard® Yellow Tough Rubb?
The signal word is danger.
What is the physical form of LOCTITE SF F720 YL known as Color Guard® Yellow Tough Rubb?
LOCTITE SF F720 YL known as Color Guard® Yellow Tough Rubb is a liquid with yellow color. It has hydrocarbons odor.
What is the solubility of LOCTITE SF F720 YL known as Color Guard® Yellow Tough Rubb?
Insoluble Water
What is LOCTITE SF F720 YL known as Color Guard® Yellow Tough Rubb used for?
Coating
What are the hazard statements for LOCTITE SF F720 YL known as Color Guard® Yellow Tough Rubb?
This substance has 8 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H351: SUSPECTED OF CAUSING CANCER.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE SF F720 YL known as Color Guard® Yellow Tough Rubb?
The melting point is Not available. and the boiling point is 56 - 141 °C (132.8 - 285.8 °F).