DUREZ 37081

Remove person to fresh air and keep comfortable for breathing. Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service. Call a poison center or a doctor if you feel unwell.

Symptoms: Corrosion of the upper respiratory tract. Risk of lung oedema.

Wash immediately with PE-glycol 400. Wash immediately with lots of water (15 minutes)/shower. Remove clothing before washing. Take victim to a doctor if irritation persists. Rinse skin with water/shower. Take off immediately all contaminated clothing. Call a physician immediately.

Symptoms: Caustic burns/corrosion of the skin. Burns. May cause an allergic skin reaction.

Rinse immediately with plenty of water for 15 minutes. Do not apply neutralizing agents. Take victim to an ophthalmologist if irritation persists. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately.

Symptoms: Serious damage to eyes.

Rinse mouth with water. Drink plenty of water. Do not induce vomiting. Immediately consult a doctor/medical service. Rinse mouth. Do not induce vomiting. Call a physician immediately.

Symptoms: Systemic damage to kidneys, liver and heart as well as neuropsychiatric disturbances are produced. Burns.

Water spray. ABC powder. Carbon dioxide. Polyvalent foam. Water spray. Dry powder. Foam. Carbon dioxide.

No information available.

DIRECT FIRE HAZARD: Flammable. Gas/vapour flammable with air within explosion limits. INDIRECT FIRE HAZARD: May be ignited by sparks. Reactions involving a fire hazard: see "Reactivity Hazard". DIRECT EXPLOSION HAZARD: Gas/vapour explosive with air within explosion limits. INDIRECT EXPLOSION HAZARD: May be ignited by sparks. Reactions with explosion hazards: see "Reactivity Hazard". Reacts violently with (strong) oxidizers. Violent exothermic reaction with (some) acids. Violent to explosive reaction with (some) halogens.

Take account of environmentally hazardous firefighting water. Cool tanks/drums with water spray/remove them into safety.

Local exhaust ventilation should be provided. Stop engines and no smoking. No naked flames or sparks. Spark- and explosionproof appliances and lighting equipment. Only qualified personnel equipped with suitable protective equipment may intervene. Do not breathe dust/fume/gas/mist/vapours/spray.

Large spills/in enclosed spaces: compressed air apparatus.

Substance must not be discharged into the sewer. Prevent soil and water pollution. Mark the danger area.

Take up liquid spill into absorbent material. Take up liquid spill into a non combustible material e.g.: sand, earth, vermiculite, kieselguhr, powdered limestone. Scoop absorbed substance into closing containers. Clean contaminated surfaces with an excess of water.

Materials: absorbent material, sand, earth, vermiculite, kieselguhr, powdered limestone

Ensure good ventilation of the work station. Observe normal hygiene standards. Do not eat, drink or smoke when using this product. Use spark-/explosionproof appliances and lighting system. Use earthed equipment. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Observe very strict hygiene - avoid contact. Use only in well-ventilated areas. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Take all necessary technical measures to avoid or minimize the release of the product on the workplace. Limit quantities of product at the minimum necessary for handling and limit the number of exposed workers. Wear personal protective equipment. Do not breathe dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes.

Store locked up. Store in a well-ventilated place. Keep cool.

Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Keep away from naked flames/heat. Keep away from ignition sources/sparks.

Local exhaust ventilation should be provided. The need for local exhaust ventilation should be evaluated by a professional industrial hygienist. Local exhaust ventilation systems should be designed by a professional engineer.

Ansell Hynit nitrile gloves - safety cuff AE32-800 or equivalent. Chemical resistant PVC gloves (to European standard EN 374 or equivalent)

Safety glasses with side shields. Protective goggles. Face shield.

On heating: gas mask with filter type A

Wear suitable protective clothing. Materials for protective clothing: Excellent resistance: Butyl rubber. Viton. Good resistance: Nitrile rubber

Avoid release to the environment.

Stable under normal conditions.

Reacts violently with (strong) oxidizers. Violent exothermic reaction with (some) acids. Violent to explosive reaction with (some) halogens.

No dangerous reactions known under normal conditions of use.

None under recommended storage and handling conditions (see section 7).

No additional information available

irritating and toxic gases and oxides of carbon