DUREZ 37130

Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell. Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. Call a POISON CENTER/doctor if you feel unwell.

Symptoms: May cause respiratory irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness.

Rinse skin with water/shower. Take off immediately all contaminated clothing. Call a physician immediately. Immediately call a POISON CENTER/doctor. Wash with plenty of water/…. If skin irritation or rash occurs: Get medical advice/attention. Specific treatment (see supplemental first aid instruction on this label). Wash contaminated clothing before reuse.

Symptoms: Burns. May cause an allergic skin reaction.

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately. Immediately call a POISON CENTER/doctor.

Symptoms: Serious damage to eyes.

Rinse mouth. Do not induce vomiting. Call a physician immediately. Do NOT induce vomiting. Call a POISON CENTER/doctor if you feel unwell. Immediately call a POISON CENTER/doctor.

Symptoms: Burns. Swallowing a small quantity of this material will result in serious health hazard.

Water spray. Dry powder. Foam. Carbon dioxide. Sand.

Do not use a heavy water stream.

Flammable liquid and vapour. May form flammable/explosive vapour-air mixture.

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.

Remove ignition sources. Use special care to avoid static electric charges. No open flames. No smoking. Do not breathe dust/fume/gas/mist/vapours/spray. Evacuate unnecessary personnel. Ventilate area.

Avoid release to the environment.

Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.

Materials: absorbent material, inert solids, such as clay or diatomaceous earth

Ensure good ventilation of the work station. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Take all necessary technical measures to avoid or minimize the release of the product on the workplace. Limit quantities of product at the minimum necessary for handling and limit the number of exposed workers. Provide local exhaust or general room ventilation. Floors, walls and other surfaces in the hazard area must be cleaned regularly. Avoid contact with skin and eyes. Do not breathe dust/fume/gas/mist/vapours/spray. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. Use personal protective equipment as required. Use only outdoors or in a well-ventilated area.

Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up. Keep only in the original container in a cool, well ventilated place away from :

Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product. Wash hands, forearms and face thoroughly after handling.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge.

Local exhaust ventilation should be provided. The need for local exhaust ventilation should be evaluated by a professional industrial hygienist. Local exhaust ventilation systems should be designed by a professional engineer.

Ansell Hynit nitrile gloves - safety cuff AE32-800 or equivalent. Chemical resistant PVC gloves (to European standard ISO 374-1 or equivalent)

Protective goggles. Face shield. Safety glasses with side shields

On heating: gas mask with filter type A

Wear suitable protective clothing. Materials for protective clothing: Excellent resistance: Butyl rubber. Viton. Good resistance: Nitrile rubber

Avoid release to the environment.

Stable under normal conditions.

Flammable liquid and vapour.

No dangerous reactions known under normal conditions of use. Not established.

Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition. Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Sparks.

Strong acids. Strong bases.

Corrosive vapours.