Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ACTIRON NX 464
- Product Code
- M6-29464
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Catalyst
Manufacturers & Suppliers
SYNTHRON
manufacturer
6 rue Barbès, 92532 LEVALLOIS PERRET, CS80050, FRANCE
(33).01.41.34.14.00
Emergency Contacts
ORFILA
(33)-01-45-42-59-59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (2-Hydroxy-1,1-dimethylethyl)ammonium toluene-4-sulphonate EC: 269-537-8 | 68298-05-5 | 40 - 50% | Yes |
| Organo-sulfurous compound EC: 263-523-5 | 62359-01-7 | 7 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Wash immediately with: Water.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Symptoms: Eye Irritation. Corneal injury.
Rinse mouth thoroughly with water. Do not induce vomiting.
Immediate Medical Attention
In case of skin irritation, consult a physician. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure. Seek immediate medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet. Dry extinguishing powder. Foam. Carbon dioxide (CO2).
Strong water jet.
Carbon monoxide (CO). Carbon dioxide (CO2). Nitrogen oxides (NOx). Sulphur oxides (SOx).
Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Personal protection equipment: see section 8. For emergency responders: Personal protection equipment: see
Cover drains. Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it. Ensure waste is collected and contained.
Absorb with liquid-binding material ( e.g. sand, diatomaceous earth or universal binding agents). Collect in closed and suitable containers for disposal. Wash with plenty of water.
Materials: liquid-binding material ( e.g. sand, diatomaceous earth or universal binding agents)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid: Eye contact.
Recommended storage temperature: At room temperature.
When using do not eat, drink, smoke, sniff. Wash hands before breaks and after work. Used working clothes should not be worn outside the work area.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
See chapter 7. No additional measures necessary.
Chemical resistant protective gloves (DIN EN 374). Suitable material: NBR (nitrile rubber) By long-term hand contact - Breakthrough time (minimum wear duration): 8 h Suitable material: Butyl caoutchouc (butyl rubber) By long-term hand contact - Breakthrough time (minimum wear duration): 8 h Suitable material: CR (polychloroprene, chloroprene rubber) By short-term hand contact - Breakthrough time (minimum wear duration): 8 h
Goggles/Face protection shield (DIN 166).
Respiratory protection necessary at: Exposure limit overshoot. Insufficient ventilation. Handling larger quantities. Aerosol or mist formation. Manifestation of side effects: respiratory irritation, nausea, discomfort. Suitable respiratory protection apparatus: Full/half-face mask (DIN EN 136/DIN EN 140) with filter type (DIN EN 14387): A2P2.
Wearing of fully sealed work clothing is recommended. Suitable protective clothing: Chemical protection clothing (DIN EN 943-1). Chemical resistant safety shoes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
Decompostion takes place from temperatures above: 150 °C
Strong oxidising agents,Strong acid,Strong alkali.
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ACTIRON NX 464?
The signal word is danger.
What is the physical form of ACTIRON NX 464?
ACTIRON NX 464 is a liquid with colorless to yellow color. It has slight odor odor.
What is ACTIRON NX 464 used for?
Catalyst
What are the hazard statements for ACTIRON NX 464?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H318: Causes serious eye damage.
What is the melting point of ACTIRON NX 464?
The melting point is No data available and the boiling point is >180 °C.