Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ACTIRON NX 452
- Product Code
- M6-29452
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Catalyst.
Manufacturers & Suppliers
SYNTHRON
manufacturer
6 rue Barbès, 92350 LEVALLOIS PERRET, B. P. 177, FRANCE
(33).01.41.34.14.00
Emergency Contacts
ORFILA (authorised advisory centre)
(33)-01-45-42-59-59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Organic formulation.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Subsequently wash off with: Water.
Symptoms: Contact dermatitis
Rinse immediately carefully and thoroughly with eye-bath or water.
Symptoms: Eye Irritation.
Rinse mouth thoroughly with water.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet. Dry extinguishing powder. Foam. Carbon dioxide (CO2).
Strong water jet.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Cover drains. Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it. Ensure waste is collected and contained.
Absorb with liquid-binding material. Collect in closed and suitable containers for disposal. Wash with plenty of water.
Materials: liquid-binding material ( e.g. sand, diatomaceous earth or universal binding agents)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. If local exhaust ventilation is not possible or not sufficient, the entire working area must be ventilated by technical means. Personal protection equipment: see
Recommended storage temperature: At room temperature.
When using do not eat, drink, smoke, sniff. Wash hands before breaks and after work. Used working clothes should not be worn outside the work area.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
See chapter 7. No additional measures necessary.
Chemical resistant protective gloves (DIN EN 374). The product Suitable material: NBR (nitrile rubber) By long-term hand contact Suitable material: Butyl caoutchouc (butyl rubber) By long-term hand contact Suitable material: CR (polychloroprene, chloroprene rubber) By long-term hand contact Suitable material: NR (natural rubber, natural latex) By short-term hand contact
Goggles (DIN 166).
Respiratory protection necessary at: Exposure limit overshoot. Insufficient ventilation. Handling larger quantities. Aerosol or mist formation. Manifestation of side effects: respiratory irritation, nausea, discomfort. Suitable respiratory protection apparatus: Full/half-face mask (DIN EN 136/DIN EN 140) with filter type (DIN EN 14387): A2P2.
Wearing of fully sealed work clothing is recommended. Chemical protection clothing. Chemical resistant safety shoes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
No hazardous reaction when stored and handled according to instruction.
Decompostion takes place from temperatures above: 150 °C
Strong oxidising agents,Strong acid,Strong alkali.
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ACTIRON NX 452?
The signal word is no signal word.
What is the physical form of ACTIRON NX 452?
ACTIRON NX 452 is a liquid. with colorless to yellow. color. It has slight odor. odor.
What is ACTIRON NX 452 used for?
Catalyst.
What is the melting point of ACTIRON NX 452?
The melting point is No data available. and the boiling point is ca.190 °C.