NextSDS Logo
Safety Data Sheet EN

TEGO® Glide 450

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEGO® Glide 450
Chemical Name
Polyether-modified polysiloxane

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use

Uses advised against

None known.

Manufacturers & Suppliers

E

Evonik Australia Pty Ltd

manufacturer

Suites 33&37 1 Ricketts Road Mt Waverley, VIC 3149 Australia

+61 3 8581 8400

Emergency Contacts

24-Hour Health

+61 2 9037 2994

CHEMTREC WORLD

+1 703 527 3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Aquatic Chronic Cat. 3

GHS Pictograms

Hazard Statements

H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P501 Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Polyether-modified polysiloxane

Chemical Name CAS Number Concentration Hazardous
octamethylcyclotetrasiloxane 556-67-2 0.1% No

* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.

Notes

Composition information of impurities and stabilizers

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

fresh air supply, consult a doctor if feeling unwell.

Skin contact

In case of contact with skin wash off with soap and water. In case of discomfort: Supply with medical care.

Eye contact

In case of contact with eyes rinse thoroughly with water. In case of discomfort: Supply with medical care.

Ingestion

Thoroughly clean the mouth with water In case of discomfort: Supply with medical care.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

foam, carbon dioxide, dry powder, water spray.

Unsuitable media

High volume water jet.

Specific hazards

In the event of fire the following can be released: - Carbon monoxide, carbon dioxide, silicon dioxide. Under certain conditions of combustion traces of other toxic substances cannot be excluded.

Instructions

No specific precautions.

Firefighter Protection

Do not inhale explosion and/or combustion gases. Self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No data available.

Environmental

Do not allow to enter drains or waterways Prevent product from getting into subsoil/soil.

Cleanup methods

Take up with absorbent material (eg sand, kieselguhr, universal binder)

Materials: sand, kieselguhr, universal binder

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide good ventilation of working area (local exhaust ventilation if necessary). Do not inhale gases/vapours/aerosols. Avoid contact with skin and eyes.

Storage

Keep container tightly closed in a cool, well-ventilated place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Material: Nitrile rubber. Break-through time: 480 min Glove thickness: 0.11 mm Material: Natural rubber. Break-through time: 480 min Glove thickness: 0.5 mm Material: Chloroprene Break-through time: 480 min Glove thickness: 0.65 mm Material: Butyl rubber. Break-through time: 480 min Glove thickness: 0.7 mm

Eyes

Safety glasses

Respiratory

in case of formation of vapours/aerosols: Short term: filter apparatus, combination filter A-P2

Skin/Body

protective clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless to light yellow
Colour Intensity
---
Form
liquid
Odor
Characteristic
Odor Threshold
not measured
Ph
4.8 40 g/l 4 % 20 °C/68 °F in Water
Melting Point
---
Boiling Point
> 200 °C/> 392 °F
Flash Point
120 °C/248 °F Method: DIN EN 22719
Freezing Point
> -18 - 0 °C/> -0.40 - 32 °F
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not measured
Vapor Pressure
not measured
Vapor Density
---
Relative Density
not measured
Bulk Density
No data available.
Density
1.01 - 1.04 g/cm3 25 °C/77 °F Method: DIN 51757
Flammability
not measured
Upper Explosive Limit
not measured
Lower Explosive Limit
not measured
Explosive Limits
---
Auto Ignition Temperature
not measured
Decomposition Temperature
not measured
Solubility
---
Partition Coefficient
---
Solubility In Water
Soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Not corrosive to metals
Dynamic Viscosity
100 - 450 mPa.s 25 °C/77 °F Method: DIN 53019
Kinematic Viscosity
96 - 433 mm2/s 25 °C/77 °F , Method: calculated
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under normal conditions.

Reactivity

see section "Possibility of hazardous reactions"

Hazardous reactions

No hazardous reactions with proper storage and handling

Avoid

None with proper storage and handling.

Incompatible

Not known.

Decomposition

None with proper storage and handling.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEGO® Glide 450?

The signal word is no signal word.

What is the physical form of TEGO® Glide 450?

TEGO® Glide 450 is a liquid with colorless to light yellow color. It has characteristic odor.

What is TEGO® Glide 450 used for?

Industrial use

What are the hazard statements for TEGO® Glide 450?

This substance has 1 hazard statement:

  • H412: Harmful to aquatic life with long lasting effects.