Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEGO GLIDE 482
- Chemical Name
- Silicone oil emulsion
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial Use
Uses advised against
None known.
Manufacturers & Suppliers
Evonik Resource Efficiency GmbH
manufacturer
Goldschmidtstr. 100, D-45127 Essen
Emergency Contacts
Evonik Resource Efficiency GmbH
+49 (0)201 173-01
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alkohole, C11-15 sekundär, ethoxyliert EC: 614-295-4 | 68131-40-8 | 10 - 25% | Yes |
| Octamethylcyclotetrasiloxane EC: 209-136-7 | 556-67-2 | 0.1 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. In the event of symptoms take medical treatment.
In case of contact with skin wash off immediately with soap and water. Consult a doctor if skin irritation persists.
Symptoms: Skin irritation
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice
Symptoms: Risk of serious damage to eyes.
Rinse out mouth and give plenty of water to drink. Take medical treatment.
Immediate Medical Attention
Take medical treatment.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide, dry powder, water spray.
Full water jet
In the event of fire the following can be released: Carbon monoxide, carbon dioxide, silicon dioxide, Formaldehyde. Under certain conditions of combustion traces of other toxic substances cannot be excluded, not combusted Hydrocarbons
Do not inhale explosion and/or combustion gases
Firefighter Protection
Use self-contained breathing apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drains or waterways. Do not discharge into the subsol/soil.
Take up with absorbent material (eg sand, kieselguhr, universal binder)
Materials: sand, kieselguhr, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear respiratory protection when spraying. Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols.
Keep container tightly closed in a well-ventilated place. PROTECT FROM FREEZING!
Wash hands before breaks and after work. Remove soiled or soaked clothing immediately. Do not eat, drink or smoke when working.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
PVC gloves. The protective gloves to be worn must satisfy the specifications of EC Guideline 89/686/EEC and the resulting Standard EN374. Specific workplace situations must be considered separately.
Safety goggles
in case of formation of vapours/aerosols: Short term: filter apparatus, combination filter A-P2
protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under normal conditions.
see section "Possibility of hazardous reactions"
Reactions with strong oxidizing agents.
None with proper storage and handling.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEGO GLIDE 482?
The signal word is danger.
What is the physical form of TEGO GLIDE 482?
TEGO GLIDE 482 is a liquid with white color. It has slight, typical odor.
What is the solubility of TEGO GLIDE 482?
not measured
What is TEGO GLIDE 482 used for?
Industrial Use
What are the hazard statements for TEGO GLIDE 482?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of TEGO GLIDE 482?
The melting point is not measured and the boiling point is not measured.