NextSDS Logo
Safety Data Sheet EN

FIRETEX FX1002 Solvent Based Intumescent

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FIRETEX FX1002 Solvent Based Intumescent
Product Code
FX1002

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Paint or paint related material.

Uses advised against

Industrial use only.

Manufacturers & Suppliers

S

Sherwin-Williams Protective & Marine

manufacturer

Tower Works Kestor Street Bolton BL2 2AL United Kingdom

+44 (0) 1204 521771

Emergency Contacts

Sherwin-Williams Protective & Marine

+(44)-870-8200 418

Emergency contact available 24 hours a day

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335
STOT RE Cat. 2 H373
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H372 May cause damage to organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Do not breathe vapor.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P281 Wear protective clothing.
P282 Wear eye or face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or physician.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P331 Do NOT induce vomiting.
P405 Store locked up.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Xylene EC: 215-535-7 1330-20-7 10 - 25% Yes
Solvent naphtha (petroleum), light arom. --- 5% Yes
Ethylbenzene EC: 202-849-4 100-41-4 1.7% Yes
Orthoboric Acid, Zinc Salt EC: 233-803-1 12767-90-7 1.7% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.

Symptoms: Mucous membrane and respiratory system irritation, headache, dizziness, fatigue, muscular weakness, drowsiness and, in extreme cases, loss of consciousness.

Skin contact

Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.

Symptoms: Repeated or prolonged contact with the mixture may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption through the skin.

Eye contact

Remove contact lenses, irrigate copiously with clean, fresh water, holding the eyelids apart for at least 10 minutes and seek immediate medical advice.

Symptoms: If splashed in the eyes, the liquid may cause irritation and reversible damage.

Ingestion

If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do NOT induce vomiting.

Symptoms: Ingestion may cause nausea, diarrhea and vomiting.

Immediate Medical Attention

Seek immediate medical advice for eye contact or ingestion.

Medical Treatment

No specific treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

alcohol-resistant foam, carbon dioxide, powders

Unsuitable media

water jet

Specific hazards

Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.

Instructions

Cool closed containers exposed to fire with water. Do not release runoff from fire to drains or watercourses.

Firefighter Protection

Fire-fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Exclude sources of ignition and ventilate the area. Avoid breathing vapor or mist. Keep unnecessary and unprotected personnel from entering.

Environmental

Do not allow to enter drains or watercourses.

Cleanup methods

Preferably clean with a detergent. Avoid using solvents.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent the creation of flammable or explosive concentrations of vapors in air and avoid vapor concentrations higher than the occupational exposure limits. In addition, the product should only be used in areas from which all naked lights and other sources of ignition have been excluded. Electrical equipment should be protected to the appropriate standard. Mixture may charge electrostatically: always use earthing leads when transferring from one container to another. Operators should wear antistatic footwear and clothing and floors should be of the conducting type. Keep away from heat, sparks and flame. No sparking tools should be used. Avoid contact with skin and eyes. Avoid the inhalation of dust, particulates, spray or mist arising from the application of this mixture. Avoid inhalation of dust from sanding. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Put on appropriate personal protective equipment (see Section 8). Never use pressure to empty. Container is not a pressure vessel. Always keep in containers made from the same material as the original one. Comply with the health and safety at work laws. Do not allow to enter drains or watercourses.

Storage

Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep away from sources of ignition. No smoking. Prevent unauthorized access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Store in closed original container at temperatures between 5°C and 25°C.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.

Fire prevention

Keep away from heat, sparks and flame. No sparking tools should be used. Prevent the creation of flammable or explosive concentrations of vapors in air.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid. White.
Colour
White
Colour Intensity
---
Form
---
Odor
Paint
Odor Threshold
Not Available (Not Tested).
Ph
Not relevant/applicable due to nature of the product.
Melting Point
Not relevant/applicable due to nature of the product.
Boiling Point
136°C
Flash Point
Closed cup: 24°C [Pensky-Martens Closed Cup]
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
0.8 (butyl acetate = 1)
Vapor Pressure
0.95 kPa [at 20°C]
Vapor Density
3.66 [Air = 1]
Relative Density
1.32
Bulk Density
---
Density
---
Flammability
Not relevant/applicable due to nature of the product.
Upper Explosive Limit
7%
Lower Explosive Limit
0.7%
Explosive Limits
---
Auto Ignition Temperature
Not relevant/applicable due to nature of the product.
Decomposition Temperature
Not relevant/applicable due to nature of the product.
Solubility
Not relevant/applicable due to nature of the product.
Partition Coefficient
Not relevant/applicable due to nature of the product.
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Kinematic (40°C): <0.205 cm2/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage and handling conditions (see Section 7).

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

When exposed to high temperatures may produce hazardous decomposition products.

Incompatible

Keep away from the following materials to prevent strong exothermic reactions: oxidizing agents, strong alkalis, strong acids.

Decomposition

Decomposition products may include the following materials: carbon monoxide, carbon dioxide, smoke, oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
PAINT
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FIRETEX FX1002 Solvent Based Intumescent?

The signal word is danger.

What is the physical form of FIRETEX FX1002 Solvent Based Intumescent?

FIRETEX FX1002 Solvent Based Intumescent is a liquid appearing as liquid. white. with white color. It has paint odor.

What is the solubility of FIRETEX FX1002 Solvent Based Intumescent?

Not relevant/applicable due to nature of the product.

What is FIRETEX FX1002 Solvent Based Intumescent used for?

Paint or paint related material.

What are the hazard statements for FIRETEX FX1002 Solvent Based Intumescent?

This substance has 7 hazard statements:

  • H226: Flammable liquid and vapor.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H372: May cause damage to organs through prolonged or repeated exposure.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of FIRETEX FX1002 Solvent Based Intumescent?

The melting point is Not relevant/applicable due to nature of the product. and the boiling point is 136°C.