PHENOXY RESIN PELLETS

Move to fresh air. Call a physician if symptoms develop or persist.

Remove contaminated clothing immediately and wash skin with soap and water. In case of eczema or other skin disorders: Seek medical attention and take along these instructions.

Symptoms: Skin irritation. May cause redness and pain. May cause allergic skin reaction. Dermatitis. Rash.

Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.

Symptoms: Causes serious eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.

Rinse mouth. Get medical attention if symptoms occur.

Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).

Do not use water jet as an extinguisher, as this will spread the fire.

Dust may form explosive mixture with air. During fire, gases hazardous to health may be formed.

In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can do so without risk.

Keep unnecessary personnel away. Ensure adequate ventilation. Avoid inhalation of dust and personnel contact with skin and eyes. Wear appropriate protective equipment and clothing during clean-up.

Avoid release to the environment.

Sweep or vacuum up spillage and collect in suitable container for disposal.

Keep container tightly closed.

Store in a well-ventilated place. Store in a cool place. Store away from incompatible materials (see section 10 of the SDS).

It is recommended that all dust control equipment such as local exhaust ventilation and material transport systems involved in handling of this product contain explosion relief vents or an explosion suppression system or an oxygen-deficient environment. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Wear appropriate chemical resistant gloves. Nitrile gloves are recommended.

Wear safety glasses with side shields (or goggles).

In case of inadequate ventilation or risk of inhalation of dust, use suitable respiratory equipment with particle filter (type P2).

Wear suitable protective clothing.

Avoid release to the environment. Environmental manager must be informed of all significant spillages.

Material is stable under normal conditions.

The product is stable and non-reactive under normal conditions of use, storage and transport.

No dangerous reaction known under conditions of normal use.

Contact with incompatible materials.

Strong oxidising agents.

No hazardous decomposition products are known.