Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ADD-5044
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive for coating industries
Manufacturers & Suppliers
ADD Additives BV
national supplier
Daltonstraat 42, 3846 BX Harderwijk, The Netherlands
Emergency Contacts
Emergency Contact
+31-880701700
office hours only
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| POLYAMINE AMIDE POLYMER COMPLEX | --- | 40 - 60% | Yes |
| XYLENE REACTION MASS OF ETHYLBENZENE AND XYLENE EC: 905-588-0 | --- | 25 - 40% | Yes |
| BUTAN-1-OL EC: 200-751-6 | 71-36-3 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty from exposure ensuring one's own safety whilst doing so.
Symptoms: There may be irritation of the throat with a feeling of tightness in the chest.
Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water.
Symptoms: There may be irritation and redness at the site of contact.
Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination.
Symptoms: There may be pain and redness. The eyes may water profusely. There may be severe pain. The vision may become blurred. May cause permanent damage.
Wash out mouth with water. Do not induce vomiting. If conscious, give half a litre of water to drink immediately. Consult a doctor.
Symptoms: There may be soreness and redness of the mouth and throat. Nausea and stomach pain may occur.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Suitable extinguishing media for the surrounding fire should be used.
In combustion emits toxic fumes.
Use water spray to cool containers.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark out the contaminated area with signs and prevent access to unauthorised personnel. Do not attempt to take action without suitable protective clothing - see section 8 of SDS. Turn leaking containers leak-side up to prevent the escape of liquid.
Do not discharge into drains or rivers. Contain the spillage using bunding.
Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: closable, labelled salvage container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Avoid the formation or spread of mists in the air.
Store in a cool, well ventilated area. Keep container tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions.
Heat.
Strong oxidising agents. Strong acids.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S. (XYLENE; BUTAN-1-OL)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ADD-5044?
The signal word is danger.
What is the physical form of ADD-5044?
ADD-5044 is a liquid with yellow color. It has characteristic odour odor.
What is ADD-5044 used for?
Additive for coating industries
What are the hazard statements for ADD-5044?
This substance has 6 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H373: May cause damage to organs through prolonged or repeated exposure.