Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Mida ADD 411 PH
- Product Form
- Mixture
- Product Code
- 511
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category: Professional use; Use of the substance/mixture: Acidic additive; Function or use category: Bleaching agents
Uses advised against
No additional information available
Manufacturers & Suppliers
Christeyns NV
manufacturer
Afrikalaan 182, 9000 GENT, Belgium
+32 (0)9/ 223 38 71
http://www.christeyns.com
Christeyns UK Ltd.
distributor
Rutland Street, GB– Bradford BD4 7EA, United Kingdom
+44 (0)1274 39 32 86
http://www.christeyns.com
Christeyns Food Hygiene Ltd. Ltd
distributor
2, Cameron Court, Winwick Quay, GB– WA2 8RE Warrington – Cheshire, United Kingdom
+44(0)1925 234696
http://www.christeyns.com
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
8am - 10pm, 7/7
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrogen peroxide substance with national workplace exposure limit(s) (IE, GB) EC: 231-765-0 | 7722-84-1 | 30 - 60% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take victim to fresh air, in a quiet place and if necessary take medical advice.
Symptoms: May cause respiratory irritation.
Wash off with plenty of water. In case of faintness or symptoms of skin irritation appear, take medical advice. Immediately remove contaminated clothing or footwear.
Symptoms: Causes skin irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
Symptoms: Causes serious eye damage.
Rinse mouth out with water. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor.
Symptoms: Harmful if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water in large amounts.
No additional information available
Firefighter Protection
Use self-contained breathing apparatus and chemically protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel.
Avoid undiluted product to come into sewer or superficial water.
Do not absorb in sawdust, paper, cloth or other combustible absorbents. Flush residue with large amounts of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. After use, container has to be completely emptied and closed. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
Keep only in original container. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed in a cool place.
Do not eat, drink or smoke when using this product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant PVC gloves (to European standard EN 374 or equivalent)
Safety glasses with side-shields (EN 166). Face shield
No personal breathing protective equipment is normally required. In case of insufficient ventilation, wear suitable respiratory equipment. Type P3
Wear suitable protective clothing minimum (EN 13034) Type 6 equipment. Chemical resistant safety shoes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored normally.
No additional information available
No additional information available
No open flames, no sparks, and no smoking. Avoid ignition sources.
Never mix with other materials.
Oxygen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2014
- Shipping Name
- HYDROGEN PEROXIDE, AQUEOUS SOLUTION
- Transport Class
- 5.1 (8)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Mida ADD 411 PH?
The signal word is danger.
What is the physical form of Mida ADD 411 PH?
Mida ADD 411 PH is a liquid with colourless. clear. color. It has irritating. odor.
What is the solubility of Mida ADD 411 PH?
Water: completely soluble
What is Mida ADD 411 PH used for?
Main use category: Professional use; Use of the substance/mixture: Acidic additive; Function or use category: Bleaching agents
What are the hazard statements for Mida ADD 411 PH?
This substance has 5 hazard statements:
- H290: May be corrosive to metals.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
What is the melting point of Mida ADD 411 PH?
The melting point is Not available and the boiling point is ≥ 100 °C.