Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Synthalat RT 35
- Product Code
- 142000
- Chemical Name
- 60%Xylol
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- UNA0-X0C8-300T-UMFR
Identified Uses
Coatings. The product is intended for professional use.
Manufacturers & Suppliers
Synthopol Chemie Dr. rer. pol. Koch GmbH & Co. KG
manufacturer
Alter Postweg 35, D-21614 Buxtehude
+49 (0)4161/7071-0
Emergency Contacts
Giftinformationszentrum Nord
+49 (0)551/19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Alkyd resin solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Reaction mass of ethylbenzene and xylene EC: 905-588-0 | --- | 40 - 45% | Yes |
This product may contain harmful substances resulting from the production process. For full text of Hazard- and EU Hazard-statements: see SECTION 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. Call a physician immediately.
Wash immediately with: Water and soap. Do not wash with: Solvents/Thinner. In case of skin irritation, consult a physician.
Symptoms: In case of skin irritation
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately. Protect uninjured eye.
Do NOT induce vomiting. Keep at rest. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Dry extinguishing powder, Carbon dioxide (CO2)
Full water jet
Hazardous combustion products
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See protective measures under point 7 and 8.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Absorb with liquid-binding material. Clear contaminated areas thoroughly.
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges. Vapours can form explosive mixtures with air. Wear personal protection equipment (refer to section 8).
Storage stability : - 10 to +25℃, 12 months
When using do not eat, drink, smoke, sniff.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable gloves type Finger stalls. Suitable material : Chemical-resistant protective gloves compliant with DIN EN 374. Remark : The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Breakthrough times and swelling properties of the material must be taken into consideration. Check leak tightness/impermeability prior to use.
Eye glasses with side protection. Remark: Do not wear contact lenses.
Respiratory protection necessary at: exceeding exposure limit values
footwear Chemical resistant safety shoes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1866
- Shipping Name
- RESIN SOLUTION
- Transport Class
- 3
- Packing Group
- III
LQ 5 L, E 1. Transport in containers with a maximum capacity of 450 liters: 2.3.2.5 IMDG code
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Synthalat RT 35?
The signal word is warning.
What is the physical form of Synthalat RT 35?
Synthalat RT 35 is a liquid appearing as light brown with light brown color. It has like: xylene odor.
What is Synthalat RT 35 used for?
Coatings. The product is intended for professional use.
What are the hazard statements for Synthalat RT 35?
This substance has 5 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of Synthalat RT 35?
The melting point is not applicable and the boiling point is 137 - 144 °C.