NextSDS Logo
Safety Data Sheet EN

TEFROLITH® FTG-35 Additive Emulsion

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEFROLITH® FTG-35 Additive Emulsion
Product Code
02082000100000X

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

G. Theodor Freese GmbH logo

G. Theodor Freese GmbH

Carl-Benz-Straße 29, 28237 Bremen, Germany

0421-39608100

http://www.gtf-freese.de

Emergency Contacts

Emergency Contact

+49 421 39608-0

24 hr.

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one EC: 220-120-9 2634-33-5 0.005% Yes

Notes

Full text of H- and EUH-statements: see section 16. Full text of H-phrases: see section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.

Skin contact

Remove contaminated, saturated clothing immediately. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.

Ingestion

If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.

Immediate Medical Attention

Seek medical advice immediately.

Medical Treatment

First Aid, decontamination, treatment of symptoms.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

alcohol resistant foam, Carbon dioxide (CO2), Powder, spray mist, (water)

Specific hazards

Do not allow water used to extinguish fire to enter drains, ground or waterways.

Instructions

Provide a conveniently located respiratory protective device. Do not allow water used to extinguish fire to enter drains, ground or waterways.

Firefighter Protection

Provide a conveniently located respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection equipment. Do not get in eyes, on skin, or on clothing.

Environmental

Do not allow to enter into surface water or drains. If the product contaminates lakes, rivers or sewages, inform competent authorities in accordance with local regulations.

Cleanup methods

Fouled surfaces must be immediately cleaned with suitable solvents.

Materials: suitable solvents

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin, eyes and clothes. Personal protection equipment: see section 8 Always keep in containers that correspond to the material of the original container. Follow the legal protection and safety regulations. Do not inhale vapours or mist.

Storage

Storage in accordance with the Ordinance on Industrial Safety and Health (BetrSiVO). Keep container tightly closed. Store carefully closed containers upright to prevent any leaks. Protect from frost and exposure to sun. Store in a dry place. Store in a closed container.

Hygiene

When using do not eat, drink or smoke.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide good ventilation. This can be achieved with local or room suction.

Hands

NBR (Nitrile rubber). For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles: EN ISO 374

Eyes

Eye glasses with side protection

Respiratory

Wear breathing apparatus if exposed to vapours/dusts/aerosols.

Skin/Body

Wear suitable protective clothing. Barrier creams can help protecting exposed skin areas. In no case should they be used after contact. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

Environmental

Do not allow to enter into surface water or drains. If the product contaminates lakes, rivers or sewages, inform competent authorities in accordance with local regulations.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
white
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
---
Ph
5 - 6.5
Melting Point
0 °C
Boiling Point
100 °C
Flash Point
not determined
Freezing Point
0 °C
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
22.993 mbar
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1.0 kg/l
Flammability
not applicable
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
272 °C
Solubility
---
Partition Coefficient
see section 12
Solubility In Water
practically insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
not determined
Kinematic Viscosity
not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7.

Reactivity

No known hazardous reactions.

Hazardous reactions

No known hazardous reactions.

Avoid

Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7.

Incompatible

No data available

Decomposition

No known hazardous decomposition products,

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Do not empty into drains; dispose of this material and its container in a safe way. Waste disposal according to directive 2008/98/ EC, covering waste and dangerous waste.

Disposal

Do not empty into drains; dispose of this material and its container in a safe way.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
not applicable
Transport Class
not applicable
Packing Group
not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEFROLITH® FTG-35 Additive Emulsion?

The signal word is no signal word.

What is the physical form of TEFROLITH® FTG-35 Additive Emulsion?

TEFROLITH® FTG-35 Additive Emulsion is a liquid with white color. It has characteristic odor.

What is the melting point of TEFROLITH® FTG-35 Additive Emulsion?

The melting point is 0 °C and the boiling point is 100 °C.