Phenylmethyl sulphonyl fluoride

Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.

After contact with skin, wash immediately with plenty of water.

Symptoms: Corrosion

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye.

Symptoms: Risk of blindness

Rinse mouth immediately and drink plenty of water. Call a physician immediately.

Symptoms: If swallowed danger of perforation of the esophagus and the stomach (strong corrosive effects).

co-ordinate firefighting measures to the fire surroundings! water, foam, dry extinguishing powder, ABC-powder

water jet

Combustible.

Fight fire with normal precautions from a reasonable distance.

Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe dust.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Take up mechanically. Control of dust.

Handle and open container with care. Avoid dust formation. Clear contaminated areas thoroughly.

Store in a dry place. Store locked up.

When using do not eat or drink. Thorough skin-cleansing after handling the product.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. Type of material: NBR (Nitrile rubber); Material thickness: >0,11 mm; Breakthrough times of the glove material: >480 minutes (permeation: level 6)

Use safety goggle with side protection. Wear face protection.

Respiratory protection necessary at: Dust formation. Particulate filter device (EN 143). P3 (filters at least 99,95 % of airborne particles, colour code: White). Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (DGUV-Rule 112/190).

Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.

Keep away from drains, surface and ground water.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

This material is not reactive under normal ambient conditions.

Violent reaction with: strong oxidiser, Metals, Acids, Strong alkali, Amines, Water, Metals (due to the release of hydrogen in an acid/alkaline medium)

Protect from moisture. Keep away from heat.

different metals

Hazardous combustion products: see section 5.

Provisions for dangerous goods (ADR) should be complied within the premises.