Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Manganese(II) chloride tetrahydrate
- Product Code
- T881
- Chemical Name
- Manganese(II) chloride tetrahydrate
Regulatory Identifiers
- CAS Number
- 13446-34-9 Check regulations →
- EC Number
- 231-869-6 Check regulations →
- REACH No.
- 01-2119934899-15-xxxx
Identified Uses
Laboratory chemical Laboratory and analytical use
Uses advised against
Do not use for products which come into contact with foodstuffs. Do not use for private purposes (household). Food, drink and animal feedingstuffs.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5 D-76185 Karlsruhe Germany
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Emergency Contacts
Giftzentrale München
+49/(0)89 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Name of substance Manganese(II) chloride tetrahydrate Molecular formula MnCl₂ · 4H₂O Molar mass 197,9[g] /mol REACH Reg. No 01-2119934899-15-xxxx CAS No 13446-34-9 EC No 231-869-6
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Manganese(II) chloride tetrahydrate EC: 231-869-6 | 13446-34-9 | --- | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.
Rinse skin with water/shower.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Symptoms: Risk of blindness, Risk of serious damage to eyes, Irritation
Rinse mouth immediately and drink plenty of water. Call a physician immediately.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. Consult an ophthalmologist. Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
co-ordinate firefighting measures to the fire surroundings! water, foam, alcohol resistant foam, dry extinguishing powder, ABC-powder
water jet
Non-combustible.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe dust.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically.
Related Products
Similar products with comparable safety profiles
Manganese(II) sulfate monohydrate
CAS: 10034-96-5
Manganese(II) sulfate monohydrate
CAS: 10034-96-5
Iron(II) chloride tetrahydrate
CAS: 13478-10-9
Tin(II) chloride dihydrate
CAS: 10025-69-1
Chromium(III) chloride hexahydrate
CAS: 10060-12-5
Manganese Dinitrate Aqueous Solution
UFI: 8300-N07C-900D-GY5S
Manganese (II,III) oxide
CAS: 1317-35-7
Manganese (IV) oxide
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid dust formation. Clear contaminated areas thoroughly.
Store in a dry place. Store locked up.
When using do not eat or drink. Thorough skin-cleansing after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. Type of material: NBR (Nitrile rubber). Material thickness: >0,3 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6).
Use safety goggle with side protection.
Respiratory protection necessary at: Dust formation. Particulate filter device (EN 143). P3 (filters at least 99,95 % of airborne particles, colour code: White). Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (DGUV-Rule 112/190).
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
This material is not reactive under normal ambient conditions.
Violent reaction with: strong oxidiser, Strong acid, Danger of explosion: Alkali metal, Zinc
Keep away from heat. Decompostion takes place from temperatures above: >106 °C.
Light metals, metal
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3288
- Shipping Name
- TOXIC SOLID, INORGANIC, N.O.S.
- Transport Class
- 6.1
- Packing Group
- III
Provisions for dangerous goods (ADR) should be complied within the premises.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Manganese(II) chloride tetrahydrate?
The signal word is danger.
What is the physical form of Manganese(II) chloride tetrahydrate?
Manganese(II) chloride tetrahydrate is a solid with pink - light red color. It has odourless odor.
What is Manganese(II) chloride tetrahydrate used for?
Laboratory chemical Laboratory and analytical use
What are the hazard statements for Manganese(II) chloride tetrahydrate?
This substance has 3 hazard statements:
- H301: Toxic if swallowed
- H318: Causes serious eye damage
- H373: May cause damage to organs (brain) through prolonged or repeated exposure (if inhaled)
What is the melting point of Manganese(II) chloride tetrahydrate?
The melting point is 58 °C and the boiling point is not determined.