Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HALT PROTEASE INHIBITOR
- Product Code
- 78438
- Chemical Name
- Not Applicable
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- No registration number is given yet for this substance / substances in this mixture since the annual import quantity is less than one tonnage per annum or the transition period for its registration according to Article 23 of REACH has not yet expired.
- UFI Code
- Not Applicable
Identified Uses
For research use only. Not for use in diagnostic procedures. SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PROC15 - Use as laboratory reagent, PC21 - Laboratory chemicals, SU24 - Scientific research and development
Uses advised against
Not for consumer use.
Manufacturers & Suppliers
LIFE TECHNOLOGIES EUROPE BV
manufacturer
KWARTSWEG 2, 2665 NN BLEISWIJK, NETHERLANDS
31-(0)180 392 400
Pierce Biotechnology
manufacturer
P.O. Box 117, Rockford, IL 61105, United States
1.815.968.0747
Life Technologies Limited
manufacturer
3 Fountain Drive, Inchinnan Business Park, Paisley PA4 9RF, UK
+44 (0)141 814 6100
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
CHEMTREC
1-703-741-5970
CHEMTREC Ireland (Dublin)
+(353)-19014670
EN, GA
CHEMTREC UK (London)
+(44)-870-8200418
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| DMSO | 67-68-5 | 85 - 95% | No |
| 4-(2-Aminoethyl)benzenesulfonyl Fluoride Hydrochloride | 30827-99-7 | 1 - 4% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration.
Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use.
Symptoms: H315 - Causes skin irritation
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: H319 - Causes serious eye irritation
Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice.
Immediate Medical Attention
Immediate medical attention is required. Get medical attention if symptoms occur. If skin irritation occurs: Get medical advice/ attention. IF exposed or concerned: Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Carbon dioxide (CO2). Foam. Dry chemical.
No information available.
No data
Firefighter Protection
Wear self-contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Avoid contact with skin, eyes or clothing. Use personal protection equipment.
No special environmental precautions required. Avoid discharge into drains and waterways whenever possible.
Soak up with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
ISH Protease 3
---
HEMPADUR 15557
---
ISH Peroxidase Inhibitor
---
ProBlock™ Gold Mammalian Protease Inhibitor Cocktail
---
ACTARA® INSECTICIDE
---
PREVENTOL P 91
UFI: QH76-50F9-7009-2NV4
Prostaglandin D Synthase (hematopoietic-type) Inhibitor I
---
TRIS (HYDROXYMETHYL) AMINOMETHANE HYDROCHLORIDE SALT
CAS: 1185-53-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wear recommended Personal Protective Equipment. See section 8 for more information. Do not get in eyes, on skin, or on clothing. Do not ingest. If during normal use the material presents a respiratory hazard, use adequate ventilation and/or wear appropriate respirator.
Keep in a dry, cool and well-ventilated place. Keep in properly labelled containers. Store in accordance with local regulations.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known.
Hazardous reaction has not been reported.
None known.
No dangerous reaction known under conditions of normal use.
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HALT PROTEASE INHIBITOR?
The signal word is warning.
What is the physical form of HALT PROTEASE INHIBITOR?
HALT PROTEASE INHIBITOR is a liquid with no data color. It has no data odor.
What is the solubility of HALT PROTEASE INHIBITOR?
No data
What is HALT PROTEASE INHIBITOR used for?
For research use only. Not for use in diagnostic procedures. SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PROC15 - Use as laboratory reagent, PC21 - Laboratory chemicals, SU24 - Scientific research and development
What are the hazard statements for HALT PROTEASE INHIBITOR?
This substance has 2 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
What is the melting point of HALT PROTEASE INHIBITOR?
The melting point is No data and the boiling point is No data.