Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INHIBITOR SNA-R
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion inhibitor for antifreeze
Manufacturers & Suppliers
TECNOFLUID S.r.l.
manufacturer
Via Monsignor Colombo, 34 21053 CASTELLANZA (VA) Italy
+390331503098
Emergency Contacts
Centro antiveleni – Ospedale Niguarda Ca' Grande – Milano
0039 02 66101029
Azienda Ospedaliera Papa Giovanni XXII
800883300
Azienda Ospedaliera Integrata Verona
800011858
CAV Centro Nazionale di Informazione Tossicologica
0382-24444
CAV "Osp. Pediatrico Bambino Gesù" Dip. Emergenza e Accettazione DEA
06-68593726
Az. Osp. Univ. Foggia
800183459
Az. Osp. "A. Cardarelli"
081-5453333
CAV Policlinico "Umberto I"
06-49978000
CAV Policlinico "A. Gemelli"
06 3054343
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
Immediately take off all contaminated clothing. Remove contaminated clothing immediately and dispose off safely. After contact with skin, wash immediately with soap and plenty of water.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time. Protect uninjured eye.
Do not under any circumstances induce vomiting.
Immediate Medical Attention
OBTAIN A MEDICAL EXAMINATION IMMEDIATELY. Consult an ophthalmologist immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, dry chemical and foam.
None in particular.
Do not inhale explosion and combustion gases. Burning produces heavy smoke.
Remove containers from fire or cool them with water
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Remove persons to safety. See protective measures under point 7 and 8.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
Dry the contaminated area with absorbents
Materials: sand, clay, sawdust or fossil flour
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists. Don't use empty container before they have been cleaned. Before making transfer operations, assure that there aren't any incompatible material residuals in the containers. See also section 8 for recommended protective equipment.
store in well closed, labelled containers. Store in a cool, dry, well-ventilated place.
Contaminated clothing should be changed before entering eating areas. Do not eat or drink while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
inserire
use suitable protective gloves. The breakthrough time of gloves used must be higher than the foreseen usage time. Gloves should be replaced immediately if there are signs of wear.
Basket eye glasses.
Not needed for normal use.
Chemical protection clothing.
prevent leakage of product into water-courses or drainage system
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
the product is stable at normal conditions of temperature and pressure
no hazardous reactivity if prescriptions for safe storage are respected
no hazardous reactions under normal storage conditions
none in particular. Use the standard precaution required for safe handling of chemicals
Avoid contact with acid substances as they lead to the formation of precipitates.
None.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
On the basis of the partition coefficient n-octanol water (log Pow) an accumulation in organisms is not expected
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6. Endocrine disrupting properties
No endocrine disruptor substances present in concentration >= 0.1%
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not discharge into drains or the environment, dispose of waste and empty containers in compliance with all national and local regulations
Dispose of waste in compliance with all national and local regulations
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INHIBITOR SNA-R?
The signal word is warning.
What is the physical form of INHIBITOR SNA-R?
INHIBITOR SNA-R is a liquid with not applicable color. It has not applicable odor.
What is the solubility of INHIBITOR SNA-R?
Miscibile con alcool, acetone e glicoli
What is INHIBITOR SNA-R used for?
Corrosion inhibitor for antifreeze
What are the hazard statements for INHIBITOR SNA-R?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of INHIBITOR SNA-R?
The melting point is -8 °C and the boiling point is 100 °C a 760 mmHg.