Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tris(2-aminoethyl)amine
- Product Code
- 225630
- Chemical Name
- Tris(2-aminoethyl)amine
Regulatory Identifiers
- CAS Number
- 4097-89-6 Check regulations →
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Aldrich
manufacturer
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N,N-bis(2-aminoethyl)ethylenediamine EC: 223-857-4 | 4097-89-6 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
If swallowed: give water to drink (two glasses at most). Seek medical advice immediately. In exceptional cases only, if medical care is not available within one hour, induce vomiting (only in persons who are wide awake and fully conscious), administer activated charcoal (20 - 40 g in a 10% slurry) and consult a doctor as quickly as possible. Do not attempt to neutralise.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Foam, Carbon dioxide (CO2), Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Carbon oxides, Nitrogen oxides (NOx). Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire.
Suppress (knock down) gases/vapors/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up carefully with liquid-absorbent material (e.g. Chemizorb®). Clean up affected area.
Materials: liquid-absorbent material (e.g. Chemizorb®)
Related Products
Similar products with comparable safety profiles
Triethylamine
CAS: 121-44-8
Triethylamine
CAS: 121-44-8
Triethylamine
CAS: 121-44-8
Triethylamine anhydrous
---
Tris(hydroxymethyl)aminomethane GR for analysis buffer substance ACS,Reag. Ph Eur
CAS: 77-86-1
Tris(hydroxymethyl)aminomethane GR for analysis buffer substance ACS,Reag. Ph Eur
CAS: 77-86-1
Diethylenetriamine
CAS: 111-40-0
3-(Dimethylamino)propylamine
CAS: 109-55-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Tightly closed. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. Store under inert gas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles
required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type ABEK. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
required; protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature) .
Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical.
No data available
Avoid moisture. Strong heating.
Strong oxidizing agents, Strong acids
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- CORROSIVE LIQUID, TOXIC, N.O.S. (N,N-bis(2-aminoethyl)ethylenediamine)
- Transport Class
- 8 (6.1)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tris(2-aminoethyl)amine?
The signal word is danger.
What is the physical form of Tris(2-aminoethyl)amine?
Tris(2-aminoethyl)amine is a clear, liquid with dark yellow color. It has no data available odor.
What is Tris(2-aminoethyl)amine used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for Tris(2-aminoethyl)amine?
This substance has 3 hazard statements:
- H301: Toxic if swallowed.
- H310: Fatal in contact with skin.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Tris(2-aminoethyl)amine?
The melting point is No data available and the boiling point is 114 °C at 20 hPa - lit..