Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ransel Calibrator (Ransel Cal)
- Product Code
- SC10154
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For in vitro diagnostic use
Uses advised against
Do not pipette by mouth. Handle laboratory reagents in accordance with Good Laboratory Practice
Manufacturers & Suppliers
Randox Laboratories Ltd.
manufacturer
55 Diamond Road, Crumlin, Co. Antrim, United Kingdom, BT29 4QY
+44 (0) 28 9442 2413
http://www.randox.com
Emergency Contacts
Emergency Contact
+44 (0) 28 9442 2413
GMT, Mon - Fri. 08.40-17.20
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ransel Calibrator | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, move victim to fresh air, rest and maintain a half-upright position. Use artificial respiration if necessary. Immediately seek medical attention.
If skin contact occurs, remove contaminated clothes, rinse skin with plenty of cold water or shower. Seek medical attention.
If eye contact occur, first rinse with plenty of cold water for several minutes, then immediately seek medical attention.
If ingested, rinse mouth. Do not induce vomiting. Give plenty of water to drink. Immediately seek medical attention.
Immediate Medical Attention
Immediately seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
As appropriate for the surrounding fire.
May emit toxic fumes under fire conditions.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear appropriate Personal Protective Equipment e.g. laboratory coat, gloves, safety glasses and mask.
Not determined
mop up with an absorbent material and hold for waste disposal.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment (refer to section 8.2.2). Wash thoroughly after handling. Do not use if skin is cut or scratched. Avoid contact with eyes, skin and clothing.
Store at temperatures and conditions as indicated on the product label.
Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation.
Standard laboratory rubber or latex gloves
Approved safety glasses
A laboratory coat is recommended
Not determined
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions
Not determined
Not determined
Not determined
Not determined
Not determined
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ransel Calibrator (Ransel Cal)?
The signal word is no signal word.
What is the physical form of Ransel Calibrator (Ransel Cal)?
Ransel Calibrator (Ransel Cal) is a lyophilised appearing as lyophilised with pale yellow liquid when reconstituted color. It has not determined odor.
What is the solubility of Ransel Calibrator (Ransel Cal)?
Not determined
What is Ransel Calibrator (Ransel Cal) used for?
For in vitro diagnostic use
What is the melting point of Ransel Calibrator (Ransel Cal)?
The melting point is Not determined and the boiling point is Not determined.