Decalcifier DC3 Q path® rapid-acting

Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician.

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.

The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.

no restriction

In case of fire may be liberated: Pyrolysis products, toxic

Use water spray jet to protect personnel and to cool endangered containers.

Do not breathe gas/vapour/aerosol. Provide adequate ventilation. Use personal protection equipment. In case of major fire and large quantities: Remove persons to safety.

In case of major fire and large quantities: Remove persons to safety. Wear a self-contained breathing apparatus and chemical protective clothing.

Do not allow to enter into surface water or drains. Make sure spills can be contained, e.g. in sump pallets or kerbed areas. Discharge into the environment must be avoided.

Clean contaminated articles and floor according to the environmental legislation.

All work processes must always be designed so that the following is as low as possible: Inhalation skin contact Eye contact

Keep container tightly closed and in a well-ventilated place.

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374. In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381

Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

no data available

The product is chemically stable under standard ambient conditions (room temperature).

no data available

no data available

no data available

no data available

no data available

Passage forbidden through tunnels of category E.

Segregation group: 1