NextSDS Logo
Safety Data Sheet EN

FineFIX Concentrate

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FineFIX Concentrate

Regulatory Identifiers

CAS Number
N/A

Identified Uses

IVD Laboratory Reagent.

Manufacturers & Suppliers

M

Milestone s.r.l.

manufacturer

Via Fatebenefratelli, 1/5, I-24010 Sorisole (BG)

0039 035.572735

M

MILESTONE S.R.L.

manufacturer

0039 035 572735

Emergency Contacts

MILESTONE S.R.L.

0039 035 572735

From 8:30 to 12:30 and 13:30 to 17:30, from Monday to Friday (Time zone: ITALY/ROME)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Water EC: 231-791-2 7732-18-5 --- No
Polyvinyl alcohol EC: 209-183-3 57-55-6 --- No
Propylene glicol EC: 200-338-0 9002-89-5 --- No
Sorbitol EC: 200-061-5 50-70-4 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air, if symptoms persist consult your doctor. In case of arrest of not breathing, give artificial respiration.

Skin contact

Wash off with soap and plenty of water. Consult a physician.

Symptoms: Generally the product does not irritate the skin.

Eye contact

Rinse thoroughly with plenty of water for at minutes, holding the eyelids apart and seek medical attention.

Ingestion

Never give anything by mouth to an unconscious person. Rinse mouth with water. If the symptoms persist, consult a doctor.

Immediate Medical Attention

Consult a doctor.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical or CO2, powder or alcohol-resistant foam. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

Carbon oxides

Firefighter Protection

As in any fire, if you must wear a respiratory protection device with independent air supply.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Do not breathe vapour / mist / gas. Provide adequate ventilation. Wear protective equipment against the effects of fumes. In the case of vapour / aerosol use of personal protective equipment.

Environmental

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

Cleanup methods

Pick up and arrange disposal without creating dust. Sweep up and shovel.

Materials: suitable, closed containers

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes and skin. Do not inhale vapours and mists. For precautions see section 2.2.

Storage

Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.

Eyes

Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (U.S.) or EN 166 (EU).

Respiratory

Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Physical State: Liquid Colour: Clear / almost colourless
Colour
Clear / almost colourless
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
5.5-6.2
Melting Point
---
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
1g/cm³ (approx)
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
Miscible with water, ethanol; not miscible with acetone, ethyl ether, toluene, hexane and dichloromethane.
Solubility In Water
Complete
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions

Reactivity

No data available

Hazardous reactions

No data available

Avoid

Exposure to light can affect the quality of the product

Incompatible

Acid chlorides, Acid anhydrides, oxidizing agents and strong oxidizing agents, chlorine formats, Reducing agents

Decomposition

No known dangerous decomposition products of the same product

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FineFIX Concentrate?

The signal word is no signal word.

What is the physical form of FineFIX Concentrate?

FineFIX Concentrate is a liquid appearing as physical state: liquid colour: clear / almost colourless with clear / almost colourless color.

What is FineFIX Concentrate used for?

IVD Laboratory Reagent.