Tracer

Move exposed individual to fresh air. If individual is not breathing, begin artificial respiration immediately.

Remove any contaminated clothing. Wash affected area with plenty of soap and water for at least 15 minutes.

Symptoms: Pain or irritation.

Wash eyes gently under running water for 15 minutes or longer, making sure that the eyelids are held open.

Symptoms: Pain or irritation.

Wash mouth out with water.

Symptoms: Irritation or discomfort.

In case of fire use carbon dioxide (CO₂), dry chemical, water spray or foam. For large fires use extinguishing media suitable for surrounding fire.

No special Hazards determined.

This product contains a material of animal origin. Observe general safety guidelines for protection during clean up procedures.

Contain spill to prevent migration.

Isolate area and absorb spill with sand, vermiculite or other inert absorbent material. Place absorbed material in container suitable for disposal.

Materials: sand, vermiculite or other inert absorbent material

This product should be handled as though capable of transmitting infectious diseases. Universal precautions should be followed when using this product.

Store at 2 to 8°C, as directed on the product label. To maintain product quality, store according to the instructions in the product labeling.

Universal precautions should be followed when using this product.

Place vial behind a metal shield, away from the user.

Impervious gloves, such as Nitrile or equivalent, should be worn to prevent skin contact. Refer U.S. OSHA 29 CFR 1910.138, European Standard EN374 or appropriate government standards.

Safety glasses or chemical goggles should be worn to prevent eye contact. Refer U.S. OSHA 29 CFR 1910.133, European Standard EN166 or appropriate government standards.

Under normal conditions, the use of this product should not require respiratory protection. If overexposure should occur and ventilation is not adequate to maintain airborne concentrations at acceptable levels, the use of respiratory protection should be evaluated by a qualified professional.

The product is stable in accordance with recommended storage conditions.

No further relevant information available.

Sodium azide forms explosive compounds with heavy metals. Repeated contact of low concentrations of azide with lead and copper commonly found in plumbing drains may result in the build up of shock sensitive compounds.

Avoid contact with incompatible materials. Avoid exposure to heat and direct sunlight.

Metals and metallic compounds

No decomposition products posing significant hazards would be expected from this product (an aqueous solution).