Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tracer
- Product Code
- Component of KIP5361
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For In Vitro Diagnostic Use. See product literature for details.
Manufacturers & Suppliers
DIAsource ImmunoAssays S.A.
manufacturer
Rue du Bosquet, 2, B-1348 Louvain-la-Neuve, Belgium
+32 (0)10/84.99.11
Emergency Contacts
DIAsource
+32 (0)10/84.99.11
only office hours
Centre Anti-Poisons (BE)
070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC# 247-500-7] and 2-methyl-4-isothiazolin-3-one [EC# 220-239-6](3:1) | 55965-84-9 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin artificial respiration immediately and obtain medical attention.
In case of skin contact, rinse with water as a precaution.
If product enters eyes, rinse eyes gently with water as a precaution.
If product is ingested, rinse mouth with water. If irritation or discomfort occurs, obtain medical attention immediately.
Immediate Medical Attention
If individual is not breathing, begin artificial respiration immediately and obtain medical attention. If irritation or discomfort occurs, obtain medical attention immediately.
Medical Treatment
No specific medical attention or treatment required.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire use carbon dioxide (CO2), dry chemical, water spray or foam. For large fires use extinguishing media suitable for surrounding fire.
No special Hazards determined.
Firefighter Protection
Self-contained breathing apparatus is recommended for firefighters in all chemical fire situations.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
This product contains material of human and animal origin and should be handled as though capable of transmitting infectious diseases. Observe general safety guidelines for protection during clean up procedures.
Isolate area and absorb spill with sand, vermiculite or other inert absorbent material. Do not allow the undiluted product to enter sewers/surface or ground water.
Place absorbed material in container suitable for disposal.
Materials: 1:10 bleach/water solution
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
This product should be handled as though capable of transmitting infectious diseases. Universal precautions should be followed when using this product.
Store at 2 to 8°C, as directed on the product label. To maintain product quality, store according to the instructions in the product labeling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Place vial behind a metal shield, away from the user.
Impervious gloves, such as Nitrile or equivalent, should be worn to prevent skin contact. Refer U.S. OSHA 29 CFR 1910.138, European Standard EN374 or appropriate government standards.
Safety glasses or chemical goggles should be worn to prevent eye contact. Refer U.S. OSHA 29 CFR 1910.133, European Standard EN166 or appropriate government standards.
Under normal conditions, the use of this product should not require respiratory protection. If overexposure should occur and ventilation is not adequate to maintain airborne concentrations at acceptable levels, the use of respiratory protection should be evaluated by a qualified professional.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in accordance with recommended storage conditions.
No further relevant information available.
No further relevant information available.
Avoid exposure to heat and direct sunlight.
strong acids, strong bases, strong oxidizers
No decomposition products posing significant hazards would be expected from this product (an aqueous solution).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2910
- Shipping Name
- Radioactive Material, excepted package-limited quantity of material
- Transport Class
- 7
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tracer?
The signal word is warning.
What is the physical form of Tracer?
Tracer is a liquid with red color. It has odorless odor.
What is Tracer used for?
For In Vitro Diagnostic Use. See product literature for details.
What are the hazard statements for Tracer?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.