Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANTIMICROBIAL TESTING DISCS
- Product Code
- various
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Manufacturers & Suppliers
Thermo Fisher Scientific New Zealand Ltd
manufacturer
244 Bush Road, Albany, Auckland, New Zealand
09 980 6700
Emergency Contacts
CHEMTREC®
09 980 6780
CHEMTREC®
+64 9 980 6780
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| NONHAZARDOUS | --- | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash off immediately with plenty of water for at least 15 minutes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Get medical attention immediately if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.
No information available.
Combustible material.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment as required. Avoid dust formation.
Should not be released into the environment. See Section 12 for additional Ecological Information.
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
ANTIMICROBIAL TESTING DISCS
---
ZymoBIOMICS Microbial Community Standard
---
GIARIDA/CRYPTOSPORIDIUM QUIK CHEK
---
Alethia Mycoplasma Direct Test Bead
---
Alethia C. difficile Positive Control
---
Biolog Identification MicroPlates
---
Biolog Identification MicroPlates
---
3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Wear personal protective equipment/face protection. Avoid contact with skin, eyes or clothing. Avoid ingestion and inhalation. Avoid dust formation.
Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from moisture.
Wear personal protective equipment/face protection. Avoid contact with skin, eyes or clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves. Disposable gloves. See manufacturers recommendations. AS/NZS 2161.1 (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information) Ensure gloves are suitable for the task: Chemical compatibility, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
Wear safety glasses with side shields (or goggles) (Australian/New Zealand Standard AS/NZS 1337 - Eye protectors for Industrial applications)
Use an AS/NZS 1716 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained in line with AS/NZS 1715 on the use and maintenance of respiratory protective devices. Recommended Filter type: Particle filter (or AUS/NZ equivalent)
Long sleeved clothing
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous polymerization does not occur.
Incompatible products, Excess heat, Avoid dust formation.
None known.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANTIMICROBIAL TESTING DISCS?
The signal word is no signal word.
What is the physical form of ANTIMICROBIAL TESTING DISCS?
ANTIMICROBIAL TESTING DISCS is a paper disc . It has no information available odor.
What is the solubility of ANTIMICROBIAL TESTING DISCS?
No information available
What is ANTIMICROBIAL TESTING DISCS used for?
Laboratory chemicals.
What is the melting point of ANTIMICROBIAL TESTING DISCS?
The melting point is No data available and the boiling point is Not applicable.