NextSDS Logo
Safety Data Sheet EN

PERFECT-DISINFECT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PERFECT-DISINFECT
Product Code
H100070

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

MULTITASK INDUSTRIES logo

MULTITASK INDUSTRIES

manufacturer

KARNEMELKSTRAAT 12, 9060 ZELZATE / BELGIUM

+32 (0)9 282 43 61

http://www.multitaskindustries.be

Emergency Contacts

Poison control centre (Brussel)

+32 70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P251 Do not pierce or burn, even after use.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethanol EC: 200-578-6 64-17-5 80% Yes
Isopropanol EC: 200-661-7 67-63-0 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

In case of serious or continuous discomforts: remove to fresh air and seek medical attention.

Symptoms: Sore throat, cough, shortness of breath, headache.

Skin contact

Rinse with water.

Symptoms: Redness, pain.

Eye contact

Rinse first with plenty of water, if necessary seek medical attention.

Symptoms: Redness, pain, blurred vision.

Ingestion

Rinse first with plenty of water, if necessary seek medical attention.

Symptoms: Diarrhoea, headache, abdominal cramps, sleepiness, vomiting.

Immediate Medical Attention

None.

Medical Treatment

None.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water.

Unsuitable media

None.

Specific hazards

None.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

Do not allow to flow into sewers or open water.

Cleanup methods

If possible, remove by using absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle with care to avoid spillage.

Storage

Keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Adequate ventilation should be provided so that exposure limits are not exceeded. For further information, check section 7.

Eyes

Keep an eyewash bottle with clean water within reach. Use tight fitting safety glasses (EN 166). Wear a full-face shield and protective suit for exceptional processing problems.

Respiratory

If necessary, use an air-purifying face mask in case of respiratory hazards.

Skin/Body

Use impermeable protective clothing resistant to this product. The choice of specific components such as face mask, gloves, boots, apron or full suit depends on the work.

Environmental

Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions. For further information, check sections 6 and 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid.
Colour
Colourless.
Colour Intensity
---
Form
---
Odor
Characteristic.
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
78°C – 82°C
Flash Point
11°C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
2.000
Vapor Pressure
---
Vapor Density
Not applicable.
Relative Density
0.8000 kg/l
Bulk Density
---
Density
---
Flammability
Not applicable.
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
Not applicable.
Solubility In Water
Completely soluble.
Solubility In Fat
---
Molecular Weight
---
Voc Content
100.00 %
Metal Corrosion
---
Dynamic Viscosity
1 mPa.s
Kinematic Viscosity
1 mm²/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Reactivity

Stable under normal conditions.

Hazardous reactions

None.

Avoid

extremely high or low temperatures

Incompatible

None.

Decomposition

Under recommended usage conditions, hazardous decomposition products are not expected.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols, flammable
Transport Class
5F
ADR

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Additional guidance: Take cover. Keep out of low areas. Prevent leaking substances from entering the aquatic environment or the sewage system.

IMDG

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Additional guidance: Take cover. Keep out of low areas. Prevent leaking substances from entering the aquatic environment or the sewage system.

IATA

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Additional guidance: Take cover. Keep out of low areas. Prevent leaking substances from entering the aquatic environment or the sewage system.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PERFECT-DISINFECT?

The signal word is danger.

What is the physical form of PERFECT-DISINFECT?

PERFECT-DISINFECT is a liquid. appearing as liquid. with colourless. color. It has characteristic. odor.

What are the hazard statements for PERFECT-DISINFECT?

This substance has 4 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.