Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANTIMICROBIAL TESTING DISCS
- Product Code
- CTS
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Oxoid Ltd
manufacturer
Wade Road, Basingstoke, Hants, UK, RG24 8PW
+44 (0) 1256 841144
Emergency Contacts
Carechem 24
+44 (0) 1865 407333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| NONHAZARDOUS | --- | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Get medical attention immediately if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention.
Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
No information available.
Combustible material.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment. Avoid dust formation.
Should not be released into the environment. See Section 12 for additional ecological information.
Sweep up or vacuum up spillage
Related Products
Similar products with comparable safety profiles
ANTIMICROBIAL TESTING DISCS
---
ZymoBIOMICS Microbial Community Standard
---
GIARIDA/CRYPTOSPORIDIUM QUIK CHEK
---
Alethia Mycoplasma Direct Test Bead
---
Alethia C. difficile Positive Control
---
Biolog Identification MicroPlates
---
Biolog Identification MicroPlates
---
SERODIA-MYCO II, SAMPLE DILUENT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Avoid ingestion and inhalation. Avoid dust formation.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing before re-use. Wash hands before breaks and at the end of workday.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source
Protective gloves. Glove material: Disposable gloves, Breakthrough time: See manufacturers recommendations, Glove thickness: -, EU standard: EN 374, Glove comments: (minimum requirement)
Safety glasses with side-shields (European standard - EN 166)
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. Large scale/emergency use: In case of insufficient ventilation wear suitable respiratory equipment. Small scale/Laboratory use: Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. When RPE is used a face piece Fit Test should be conducted
Long sleeved clothing
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous polymerization does not occur. None under normal processing.
Incompatible products. Excess heat. Avoid dust formation.
None known.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANTIMICROBIAL TESTING DISCS?
The signal word is no signal word.
What is the physical form of ANTIMICROBIAL TESTING DISCS?
ANTIMICROBIAL TESTING DISCS is a paper disc . It has no information available odor.
What is the solubility of ANTIMICROBIAL TESTING DISCS?
No information available
What is ANTIMICROBIAL TESTING DISCS used for?
Laboratory chemicals.
What is the melting point of ANTIMICROBIAL TESTING DISCS?
The melting point is No data available and the boiling point is Not applicable.