R 660

Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest. Obtain medical attention if breathing difficulty persists.

Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.

Take off immediately all contaminated clothing. Wash with plenty of water/... Seek medical attention if ill effect or irritation develops. Wash skin with plenty of water.

Symptoms: Repeated exposure may cause skin dryness or cracking.

In case of eye contact, immediately rinse with clean water for 10-15 minutes. Contact ophthalmologist immediately. Rinse eyes with water as a precaution.

Symptoms: Direct contact with the eyes is likely to be irritating.

Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Allow the victim to rest. Call a poison center or a doctor if you feel unwell.

Symptoms: Ingestion unlikely.

Foam. Carbon dioxide. Water spray. Dry powder. Sand.

Do not use a heavy water stream.

Extremely flammable aerosol. Pressurised container: May burst if heated.

Cool down the containers exposed to heat with a water spray. Evacuate area. Exercise caution when fighting any chemical fire.

Ventilate spillage area. Evacuate area. Do not touch spilled material. No open flames, no sparks, and no smoking.

Avoid release to the environment.

Clean up any spills as soon as possible, using an absorbent material to collect it. Collect the residue by means of a non-combustible absorbent material. Mechanically recover the product.

Materials: absorbent material, non-combustible absorbent material

Ensure good ventilation of the work station. Wear personal protective equipment. Good ventilation of the workplace required. Store in protected area to prevent accidental perforation. Use only properly specified equipment which is suitable for this product, its supply pressure and temperature. Not to be used for any purpose other than the one the product was designed for. Do not breathe gas, fumes, vapour or spray. Do not pierce or burn, even after use. Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Do not pierce or burn, even after use. Store and handle as though always a serious potential fire/explosion and health hazard exists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source.

Store tightly closed in a dry, cool and well-ventilated place. Keep away from heat. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Keep away from ignition sources. Maintain air gap between stacks/pallets.

Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash contaminated clothing before reuse. Always wash hands after handling the product.

Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Do not pierce or burn, even after use. Store and handle as though always a serious potential fire/explosion and health hazard exists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source.

Ensure good ventilation of the work station. Provide local exhaust or general room ventilation.

The protective gloves to be used must comply with the specifications of the regulation 2016/425 and the resultant standard EN 374. Breakthrough time : refer to the recommendations of the supplier

In case of insufficient ventilation, wear suitable respiratory equipment

Skin protection appropriate to the conditions of use should be provided

Avoid release to the environment.

Stable under normal conditions.

Extremely flammable aerosol. Pressurised container: May burst if heated.

None under normal conditions.

Open flame. Heat. Direct sunlight. Sparks. Take precautionary measures against static discharges. Avoid contact with hot surfaces. No flames, no sparks. Eliminate all sources of ignition.

Strong acids. Strong bases. Strong oxidizers.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.