PICK

Remove victim to fresh air, away from the accident scene. If the subject stops breathing, administer artificial respiration.

Remove contaminated clothing. Rinse skin with a shower immediately.

Remove contact lenses, if present. Wash immediately with plenty of water for at least 30-60 minutes, opening the eyelids fully.

Have the subject drink as much water as possible. Do not induce vomiting unless explicitly authorised by a doctor.

carbon dioxide, foam, powder and water spray.

None in particular.

HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE. Do not breathe combustion products.

Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.

If there are no contraindications, spray powder with water to prevent the formation of dust.

The product must not penetrate into the sewer system or come into contact with surface water or ground water.

Collect the leaked product and place it in containers for recovery or disposal. If there are no contraindications, use jets of water to eliminate product residues.

Avoid contact with eyes and skin. Do not breathe powders, vapours or mists. Do not eat, drink or smoke during use. Wash hands after use.

Store only in the original container. Store in a ventilated and dry place, far away from sources of ignition. Keep containers well sealed. Keep the product in clearly labelled containers. Avoid overheating. Avoid violent blows.

Do not eat, drink or smoke during use. Wash hands after use.

Ensure that there is an adequate earthing system for the equipment and personnel.

As the use of adequate technical equipment must always take priority over personal protective equipment, make sure that the workplace is well aired through effective local aspiration.

In the case of prolonged contact with the product, protect the hands with penetration-resistant work gloves (see standard EN 374). Work glove material must be chosen according to the use process and the products that may form. Latex gloves may cause sensitivity reactions.

Wear a hood visor or protective visor combined with airtight goggles (see standard EN 166). In the presence of risks of exposure to splashes or squirts during work, adequate mouth, nose and eye protection should be used to prevent accidental absorption.

None required, unless indicated otherwise in the chemical risk assessment.

Wear category III professional long-sleeved overalls and safety footwear (see Regulation 2016/425 and standard EN ISO 20344). Wash body with soap and water after removing protective clothing.

The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.

Information not available

NITRIC ACID: Decomposes at 84°C/183°F. Possibility of self-ignition. AMMONIUM BIFLUORIDE: Decomposes at temperatures above 230°C/446°F. Reacts violently with: water.

The product may react violently with water.

Avoid overheating. Prevent moisture or water from penetrating inside the containers. NITRIC ACID: Avoid exposure to: heat, light. AMMONIUM BIFLUORIDE: Avoid exposure to: light, high temperatures.

metals

hydrogen