Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MD 1000 C
- Product Form
- Mixture
- Product Code
- MD1000C_A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Industrial use Use of the substance/mixture : Lubricant.
Uses advised against
No additional information available
Manufacturers & Suppliers
SOGELUB S.A.
manufacturer
Rue de la Terre à Briques, 13, BE– B-7522 Marquain, Belgium
+32 69 59 09 49
Emergency Contacts
Centre Anti-Poisons/Antigifcentrum c/o Hôpital Central de la Base - Reine Astrid
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons C7, n-alkanes, isoalkanes, cyclics EC: 927-510-4 | --- | 60 - 80% | Yes |
| Copper substance with national workplace exposure limit(s) (GB) EC: 231-159-6 | 7440-50-8 | 2 - 5% | Yes |
| Carbon dioxide substance with national workplace exposure limit(s) (GB); substance with a Community workplace exposure limit EC: 204-696-9 | 124-38-9 | 2 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest. Obtain medical attention if breathing difficulty persists.
Symptoms: Vapours may cause drowsiness and dizziness. Inhalation of high concentration vapours may cause respiratory irritation.
Take off immediately all contaminated clothing. Wash with plenty of water/... Seek medical attention if ill effect or irritation develops. Wash skin with plenty of water. If skin irritation occurs: Get medical advice/attention.
Symptoms: Repeated exposure may cause skin dryness or cracking. Irritation.
In case of eye contact, immediately rinse with clean water for 10-15 minutes. Contact ophthalmologist immediately. Rinse eyes with water as a precaution.
Symptoms: Burning sensation. Redness.
Rinse mouth. Obtain emergency medical attention. Do NOT induce vomiting. Allow the victim to rest. Do not induce vomiting. Call a physician immediately.
Symptoms: Ingestion unlikely. Risk of lung oedema.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Carbon dioxide. Water spray. Dry powder. Sand.
Do not use a heavy water stream.
Extremely flammable aerosol. Pressurised container: May burst if heated.
On heating, there is a risk of bursting due to internal pressure build-up. Cool down the containers exposed to heat with a water spray. Evacuate area. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove ignition sources. Ventilate area. No smoking. Provide local exhaust or general room ventilation. Evacuate and limit access. Do not touch spilled material. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes.
Avoid release to the environment.
Clean up any spills as soon as possible, using an absorbent material to collect it. Collect the residue by means of a non-combustible absorbent material. Mechanically recover the product.
Materials: absorbent material, non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Good ventilation of the workplace required. Use only properly specified equipment which is suitable for this product, its supply pressure and temperature. Not to be used for any purpose other than the one the product was designed for. Do not breathe gas, fumes, vapour or spray. Do not pierce or burn, even after use. Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Store and handle as though always a serious potential fire/explosion and health hazard exists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. Wear personal protective equipment.
Use and store away from all naked flames, heat sources or working electrical appliances.
Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not spray on an open flame or other ignition source.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station. Provide local exhaust or general room ventilation.
Use neoprene or rubber gloves. EN 374
In case of insufficient ventilation, wear suitable respiratory equipment. Type AX - Low-boiling (<65 °C) organic compounds
Skin protection appropriate to the conditions of use should be provided
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling and storage conditions.
No additional information available. Extremely flammable aerosol. Pressurised container: May burst if heated.
None under normal conditions.
Open flame. Heat. Direct sunlight. Sparks. Take precautionary measures against static discharges. Avoid contact with hot surfaces. No flames, no sparks. Eliminate all sources of ignition.
Strong oxidizers. acids and bases.
Incomplete combustion releases dangerous carbon monoxide, carbon dioxide and other toxic gases. Soot. hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MD 1000 C?
The signal word is danger.
What is the physical form of MD 1000 C?
MD 1000 C is a liquid appearing as grease. with copper. color. It has characteristic. odor.
What is the solubility of MD 1000 C?
insoluble in water.
What is MD 1000 C used for?
Main use category : Industrial use Use of the substance/mixture : Lubricant.
What are the hazard statements for MD 1000 C?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of MD 1000 C?
The melting point is Not applicable and the boiling point is Not available.