Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MD 670
- Product Form
- Mixture
- Product Code
- MD670_A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Industrial use Use of the substance/mixture : Lubricant
Uses advised against
No additional information available
Manufacturers & Suppliers
SOGELUB S.A.
manufacturer
Rue de la Terre à Briques, 13, BE– B-7522 Marquain, Belgium
+32 69 59 09 49
Emergency Contacts
Centre Anti-Poisons/Antigifcentrum c/o Hôpital Central de la Base - Reine Astrid
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C6, isoalkanes, <5% n-hexane EC: 931-254-9 | --- | 60 - 80% | Yes |
| aluminium powder (stabilised) EC: 231-072-3 | 7429-90-5 | 5 - 8% | Yes |
| Carbon dioxide EC: 204-696-9 | 124-38-9 | 2 - 5% | Yes |
| 2,6-Di-tert-butyl-p-cresol EC: 204-881-4 | 128-37-0 | 0.1 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air. Allow the victim to rest. Obtain medical attention if breathing difficulty persists.
Symptoms: Vapours may cause drowsiness and dizziness. Inhalation of high concentration vapours may cause respiratory irritation.
Take off immediately all contaminated clothing. Wash with plenty of water/... Seek medical attention if ill effect or irritation develops.
Symptoms: Repeated exposure may cause skin dryness or cracking.
In case of eye contact, immediately rinse with clean water for 10-15 minutes. Contact ophthalmologist immediately.
Symptoms: Burning sensation. Redness.
Rinse mouth. Obtain emergency medical attention. Do NOT induce vomiting. Allow the victim to rest.
Symptoms: Ingestion unlikely.
Immediate Medical Attention
Obtain medical attention if breathing difficulty persists. Seek medical attention if ill effect or irritation develops. Contact ophthalmologist immediately. Obtain emergency medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Carbon dioxide. Water spray. Dry powder. Sand.
Do not use a heavy water stream.
Extremely flammable aerosol.
Cool down the containers exposed to heat with a water spray. Evacuate area. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Do not touch spilled material.
Prevent entry to sewers and public waters.
Clean up any spills as soon as possible, using an absorbent material to collect it. Collect the residue by means of a non-combustible absorbent material.
Materials: absorbent material, non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Good ventilation of the workplace required. Use only properly specified equipment which is suitable for this product, its supply pressure and temperature. Not to be used for any purpose other than the one the product was designed for. Do not breathe gas, fumes, vapour or spray. Do not pierce or burn, even after use. Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke. Do not pierce or burn, even after use. Store and handle as though always a serious potential fire/explosion and health hazard exists.
Protect from sunlight. Store in a well-ventilated place. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Use and store away from all naked flames, heat sources or working electrical appliances. Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local exhaust or general room ventilation.
Use neoprene or rubber gloves. EN 374
Eye protection should only be necessary where liquid could be splashed or sprayed
In case of insufficient ventilation, wear suitable respiratory equipment. Type AX - Low-boiling (<65 °C) organic compounds
Skin protection appropriate to the conditions of use should be provided
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling and storage conditions.
No additional information available.
None under normal conditions.
Open flame. Heat. Direct sunlight. Sparks. Take precautionary measures against static discharges.
Strong oxidizers. acids and bases.
Incomplete combustion releases dangerous carbon monoxide, carbon dioxide and other toxic gases. Soot. hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MD 670?
The signal word is danger.
What is the physical form of MD 670?
MD 670 is a liquid appearing as grease. with aluminium. color. It has characteristic. odor.
What is the solubility of MD 670?
insoluble in water.
What is MD 670 used for?
Main use category : Industrial use Use of the substance/mixture : Lubricant
What are the hazard statements for MD 670?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of MD 670?
The melting point is Not available and the boiling point is Not available.