NextSDS Logo
Safety Data Sheet EN

SunPURO® Red Iron Ox

CAS 1309-37-1
EC Not available.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SunPURO® Red Iron Ox
Product Code
C338001
Synonyms
SunPURO® Red Iron Oxide

Regulatory Identifiers

CAS Number
1309-37-1 Check regulations →
EC Number
Not available. Check regulations →
REACH No.
01-2119457614-35

Identified Uses

Cosmetics.

Uses advised against

Not applicable.

Manufacturers & Suppliers

S

Sun Chemical S.A./N.V.

manufacturer

Parc Industriel de la Noire Epine, Av. Fleming 2, 1300 Wavre, Belgium

+32 10 23 15 00

Emergency Contacts

Chemtrec International

(1)703 527 3887

24 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Hazard Statements

No known significant effects or critical hazards.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
diron trioxide EC: 215-168-2 1309-37-1 80 - 100% No

Date of issue : 9 May 2022

Notes

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment, are PBTs or vPvBs or have been assigned a workplace exposure limit and hence require reporting in this section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.

Symptoms: Irritation of the nose, throat and lungs.

Skin contact

Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognised skin cleanser.

Eye contact

Remove contact lenses, if present and easy to do. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open.

Ingestion

Keep person warm and at rest. Wash out mouth with water. If swallowed, drink plenty of water. Do not induce vomiting.

Immediate Medical Attention

Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, CO₂, water spray (fog) or foam.

Unsuitable media

Do not use water jet.

Specific hazards

No specific fire or explosion hazard.

Instructions

Cool closed containers exposed to fire with water.

Firefighter Protection

Appropriate breathing apparatus may be required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

For non-emergency personnel: Avoid breathing dust. Refer to protective measures listed in sections 7 and 8. For emergency responders: If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in 'For non-emergency personnel'.

Environmental

Do not allow to enter drains or watercourses.

Cleanup methods

Preferably clean with a detergent. Avoid using solvents.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid breathing dust. Put on appropriate personal protective equipment (see Section 8). Comply with the health and safety at work laws.

Storage

Store between 5 – 35 °C. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep container tightly closed. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.

Fire prevention

Keep away from heat.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust ventilation and good general extraction. If these are not sufficient to maintain concentrations of particulates and solvent vapours below the OEL, suitable respiratory protection must be worn.

Hands

Wear suitable gloves tested to EN374. There is no one glove material or combination of materials that will give unlimited resistance to any individual or combination of chemicals. Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Barrier creams may help to protect the exposed areas of the skin but should not be applied once exposure has occurred.

Eyes

Safety eyewear should be used when there is a likelihood of exposure. Use eye protection according to EN 166.

Respiratory

In case of inadequate ventilation wear respiratory protection. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Use a properly fitted, particulate filter respirator complying with an approved standard if a risk assessment indicates this is necessary.

Skin/Body

Personnel should wear antistatic clothing made of natural fibres or of high-temperature-resistant synthetic fibres.

Environmental

Do not allow to enter drains or watercourses.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid. [Powder.]
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
RedRed.
Colour Intensity
---
Form
---
Odor
Odourless.
Odor Threshold
Not applicable.
Ph
Not tested
Melting Point
Not applicable.
Boiling Point
---
Flash Point
Not applicable.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not tested
Vapor Pressure
Not tested
Vapor Density
Not tested
Relative Density
5.95
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not applicable.
Decomposition Temperature
Not applicable.
Solubility
Insoluble in the following materials: cold water and hot water.
Partition Coefficient
Not applicable.
Solubility In Water
Insoluble in the following materials: cold water and hot water.
Solubility In Fat
---
Molecular Weight
---
Voc Content
Not applicable.
Metal Corrosion
---
Dynamic Viscosity
Not tested
Kinematic Viscosity
Not tested
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage and handling conditions (see Section 7).

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Avoid

When exposed to high temperatures may produce hazardous decomposition products.

Incompatible

oxidising agents, strong alkalis, strong acids

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IMDG

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IATA

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is SunPURO® Red Iron Ox known by?

SunPURO® Red Iron Ox is also known as: SunPURO® Red Iron Oxide

What is the hazard signal word for SunPURO® Red Iron Ox?

The signal word is no signal word.

What is the physical form of SunPURO® Red Iron Ox?

SunPURO® Red Iron Ox is a solid. [powder.] with redred. color. It has odourless. odor.

What is the solubility of SunPURO® Red Iron Ox?

Insoluble in the following materials: cold water and hot water.

What is SunPURO® Red Iron Ox used for?

Cosmetics.

What are the hazard statements for SunPURO® Red Iron Ox?

This substance has 1 hazard statement:

  • No known significant effects or critical hazards.

What is the melting point of SunPURO® Red Iron Ox?

The melting point is Not applicable. .