NextSDS Logo
Safety Data Sheet EN

LPM Oil

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LPM Oil

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Professional use

Manufacturers & Suppliers

LONZA Pharma & Biotech logo

LONZA Pharma & Biotech

manufacturer

Rijksweg 11, 2880 Bornem, Belgium

+32 3 890 05 11

https://www.capsugel.com/

Emergency Contacts

Emergency information service

+32 3 890 05 11

Mon-Fri 09:00 - 17:00

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Aquatic Acute Cat. 2 H401

GHS Pictograms

Hazard Statements

H401 Toxic to aquatic life.

Precautionary Statements

P273 Avoid release to the environment.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

The product does not contain any (other) ingredients which are classified according to present knowledge of the supplier and contribute to the classification of the product and hence require reporting in this section.

Chemical Name CAS Number Concentration Hazardous
White mineral oil (petroleum) (visco >20,5mm2/s) 8042-47-5 50 - 75% No
Lecithin 8002-43-5 25 - 50% No
Stearic acid 57-11-4 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician.

Skin contact

Wash with plenty of soap and water. Call a POISON CENTER/doctor.

Eye contact

Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Ingestion

Rinse mouth with water (only if the person is conscious). IF SWALLOWED: Immediately call a POISON CENTER/doctor.

Immediate Medical Attention

In all cases of doubt, or when symptoms persist, seek medical advice. In case of respiratory tract irritation, consult a physician. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Immediately call a POISON CENTER/doctor. Call a POISON CENTER/doctor (for skin contact).

Medical Treatment

None.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry extinguishing powder; Carbon dioxide (CO2)

Unsuitable media

Water jet.

Specific hazards

During fire hazardous fumes/smoke could be produced.

Instructions

Fight fire with normal precautions from a reasonable distance. Co-ordinate firefighting measures to the fire surroundings.

Firefighter Protection

Self-contained breathing apparatus (SCBA). Standard protective clothing for firefighters.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons to safety. Ventilate affected area.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Wipe up with absorbent material (e.g. cloth, fleece).

Materials: cloth, fleece

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use local and general ventilation. Use only in well-ventilated areas.

Storage

Protect against high temperatures and UV-radiation/sunlight. Keep container tightly closed.

Hygiene

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

General ventilation.

Hands

Wear suitable gloves. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Use gloves with a minimum breakthrough times of the glove material: >480 minutes (permeation: level 6).

Eyes

Use safety goggle with side protection

Respiratory

In case of inadequate ventilation wear respiratory protection.

Skin/Body

Chemical protective clothing.

Environmental

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid (oil)
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
various
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
---
Ph
not determined
Melting Point
not determined
Boiling Point
not determined
Flash Point
not determined
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not determined
Vapor Pressure
not determined
Vapor Density
this information is not available
Relative Density
<1 (water = 1)
Bulk Density
---
Density
not determined
Flammability
not relevant, (fluid)
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
---
Solubility
insoluble in water
Partition Coefficient
this information is not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
not determined
Kinematic Viscosity
not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Reactivity

This material is not reactive under normal ambient conditions.

Hazardous reactions

No known hazardous reactions.

Avoid

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Incompatible

Oxidisers. Strong acids. Strong bases.

Decomposition

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LPM Oil?

The signal word is no signal word.

What is the physical form of LPM Oil?

LPM Oil is a liquid (oil) with various color. It has characteristic odor.

What is the solubility of LPM Oil?

insoluble in water

What is LPM Oil used for?

Professional use

What are the hazard statements for LPM Oil?

This substance has 1 hazard statement:

  • H401: Toxic to aquatic life.

What is the melting point of LPM Oil?

The melting point is not determined and the boiling point is not determined.