Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Castolin FLUX 157
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- C092-HV9K-X103-A52E
Identified Uses
Brazing flux
Manufacturers & Suppliers
Castolin Eutectic Limited
manufacturer
UNIT 3, OAK TREE PARK, GB-B98 9NW REDDITCH, WORC’S
+44 (0) 1527 5822 00
Castolin Eutectic GmbH
manufacturer
Gutenbergstrasse 10, D-65830 Kriftel
+49 (0) 6192 403 0
Emergency Contacts
NHS
111
NHS 24
111
GBK GmbH, Ingelheim
+49 (0) 6132 / 84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| zinc chloride EC: 231-592-0 | 7646-85-7 | 50% | Yes |
| ammonium chloride EC: 235-186-4 | 12125-02-9 | 5 - 10% | Yes |
| sodium fluoride EC: 231-667-8 | 7681-49-4 | 0.1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take affected person into fresh air. Consult a physician if necessary.
Symptoms: May cause respiratory irritation.
In case of contact with skin wash off with soap and water.
Symptoms: Causes burns. Causes severe skin burns and eye damage.
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.
Symptoms: Causes severe skin burns and eye damage.
Rinse mouth. Do not induce vomiting.
Symptoms: Harmful if swallowed.
Immediate Medical Attention
Consult a physician if necessary (inhalation). Seek medical advice (eyes). Seek hospital (ingestion).
Medical Treatment
Treat symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire fighting measures that suit the environment and products stored.
Sufficient measures must be taken to retain water used for extinguishing.
Firefighter Protection
Wear full protective suit. In case of fire, wear suitable respiratory equipment with positive air supply.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of vapour formation use respirator. Ensure adequate ventilation. Use personal protective clothing. For non-emergency personnel: Avoid contact with skin, eyes and clothing. For emergency responders: Use personal protective clothing. Remove persons to safety.
Do not discharge into the drains or bodies of water.
Shovel into suitable container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly closed. Avoid contact with skin, eyes and clothing. Use only in well-ventilated areas. ANSI Z49.1 Safety in Welding, Cutting and allied processes.
Keep in closed original container.
When using do not eat, drink or smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide appropriate exhaust ventilation at machinery and at places where dust or smoke can be generated.
Protective gloves resistant to chemicals made off nitrile, Minimum coat thickness 0.4 mm, Permeation resistance (wear duration) approx. 480 minutes, i.e. protective glove <Camatril 735> made by www.kcl.de. Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the recommendations given by the manufacturer of protective gloves. This recommendation refers exclusively to the chemical compatibility and the lab test conforming to EN 374 carried out under lab conditions.
Safety goggles with side protection (EN 166).
Use suitable breathing apparatus if there is inadequate ventilation. Multi-purpose filter ABEK/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Contact with acids liberates toxic gas.
Contact with acids liberates toxic gas.
Hydrogen fluoride is liberated on heating at high temperatures in the presence of water vapor. Contact with acids liberates toxic gas.
Contact with strong acids liberates hydrogen fluoride. Evolution of ammonia under influence of alkalies.
Hydrogen fluoride is liberated on heating at high temperatures in the presence of water vapor.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1840
- Shipping Name
- ZINC CHLORIDE SOLUTION
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Castolin FLUX 157?
The signal word is danger.
What is the physical form of Castolin FLUX 157?
Castolin FLUX 157 is a liquid with product-specific color. It has odourless odor.
What is Castolin FLUX 157 used for?
Brazing flux
What are the hazard statements for Castolin FLUX 157?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H335: May cause respiratory irritation.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Castolin FLUX 157?
The melting point is No data available and the boiling point is n.a..