Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium hydroxide monohydrate 99.99 Suprapur®
- Product Code
- 1.06466
- Chemical Name
- Sodium hydroxide monohydrate
Regulatory Identifiers
- CAS Number
- 12200-64-5 Check regulations →
- REACH No.
- A registration number is not available for this substance as the substance or its uses are exempted from registration or the annual tonnage does not require a registration.
Identified Uses
Reagent for analysis, Chemical production
Manufacturers & Suppliers
Sigma-Aldrich Chemie GmbH
manufacturer
Eschenstrasse 5, D-82024 TAUFKIRCHEN
+49 (0)89 6513-1130
Emergency Contacts
CHEMTREC Deutschland
0800 181 7059
CHEMTREC weltweit
+49 (0)696 43508409
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Index-No. : 011-002-00-6 EC-No. : 215-185-5
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Caustic soda monohydrate EC: 215-185-5 | 12200-64-5 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.
Immediate Medical Attention
Call in physician / ophthalmologist immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not combustible. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Dispose of properly. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Sodium hydroxide solution 30% Suprapur®
---
di-Sodium hydrogen phosphate anhydrous 99.99 Suprapur®
CAS: 7558-79-4
Ammonium dihydrogen phosphate 99.99 Suprapur®
CAS: 7722-76-1
di-Sodium tetraborate anhydrous 99.99 Suprapur®
CAS: 1330-43-4
Boric acid 99.9999 Suprapur®
CAS: 10043-35-3
Sodium hydroxide solution 45 %, extra pure
---
Hydrochloric acid 30% Suprapur®
CAS: 7647-01-0
Iodine 99.999 Suprapur®
CAS: 7553-56-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2.
Tightly closed. Dry.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0,11 mm, Protective index : Full contact, Manufacturer : KCL 741 Dermatril® L; Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0,11 mm, Protective index : Splash contact, Manufacturer : KCL 741 Dermatril® L; Remarks : This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter B-(P3). The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
No data available
Risk of explosion/exothermic reaction with: Acetone, Nitriles, Alkaline earth metals, Cyanides, magnesium, organic nitro compounds, oxidisable substances, acids, phosphides, halogens, halogen-halogen compounds, chlorinated solvents, Ethylene oxide, Hydrazine hydrate, hydroxylamine, anhydrides, Peroxides, Acrolein, Acid chlorides, Sulphuric acid, silver, hydrogen peroxide, Water, Metals, Light metals. Possible formation of: Hydrogen. Violent reactions possible with: organic combustible substances, ammonium compounds, phenols. Generates dangerous gases or fumes in contact with: persulfates, Sodium borohydride, Oxides of phosphorus.
no information available
Aluminium, brass, Metals, metal alloys, Zinc, Tin
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1823
- Shipping Name
- SODIUM HYDROXIDE, SOLID
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium hydroxide monohydrate 99.99 Suprapur®?
The signal word is danger.
What is the physical form of Sodium hydroxide monohydrate 99.99 Suprapur®?
Sodium hydroxide monohydrate 99.99 Suprapur® is a solid with off-white color. It has odourless odor.
What is Sodium hydroxide monohydrate 99.99 Suprapur® used for?
Reagent for analysis, Chemical production
What are the hazard statements for Sodium hydroxide monohydrate 99.99 Suprapur®?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Sodium hydroxide monohydrate 99.99 Suprapur®?
The melting point is No data available and the boiling point is No data available.