Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- di-Sodium tetraborate anhydrous 99.99 Suprapur®
- Product Code
- 106309
- Chemical Name
- di-Sodium tetraborate anhydrous
Regulatory Identifiers
- CAS Number
- 1330-43-4 Check regulations →
- REACH No.
- 01-2119490790-32-XXXX
Identified Uses
Reagent for analysis. In compliance with the conditions described in the annex to this safety data sheet.
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Germany
+49 6151 72-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| disodium tetraborate EC: 215-540-4 | 1330-43-4 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Call in physician.
Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
Rinse out with plenty of water. Remove contact lenses. Call in ophthalmologist.
Immediately make victim drink water (two glasses at most). Consult a physician.
Immediate Medical Attention
Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up carefully. Clean up affected area.
Related Products
Similar products with comparable safety profiles
di-Sodium hydrogen phosphate anhydrous 99.99 Suprapur®
CAS: 7558-79-4
di-Sodium tetraborate anhydrous for analysis
CAS: 1330-43-4
di-Sodium tetraborate
CAS: 1330-43-4
di-Sodium tetraborate decahydrate
CAS: 1303-96-4
Sodium tetraborate, anhydrous
CAS: 1330-43-4
Sodium tetraborate decahydrate
CAS: 1303-96-4
Sodium hydroxide solution 30% Suprapur®
---
Nitric acid 69% Suprapur®
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions. Work under hood. Do not inhale substance/mixture.
Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorised persons.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: - Glove material: Nitrile rubber - Glove thickness: 0,11 mm - Break through time: > 480 min splash contact: - Glove material: Nitrile rubber - Glove thickness: 0,11 mm - Break through time: > 480 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet <(>, <) > supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
required when dusts are generated. Recommended Filter type: Filter P 3 (acc. to DIN 3181) for solid and liquid particles of toxic and very toxic substances The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
See section 10.3
Violent reactions possible with: strong oxidising agents, Acids, metallic salts
no information available
no information available
in the event of fire: See section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for di-Sodium tetraborate anhydrous 99.99 Suprapur®?
The signal word is danger.
What is the physical form of di-Sodium tetraborate anhydrous 99.99 Suprapur®?
di-Sodium tetraborate anhydrous 99.99 Suprapur® is a powder with white color. It has odourless odor.
What is di-Sodium tetraborate anhydrous 99.99 Suprapur® used for?
Reagent for analysis. In compliance with the conditions described in the annex to this safety data sheet.
What are the hazard statements for di-Sodium tetraborate anhydrous 99.99 Suprapur®?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H360FD: May damage fertility. May damage the unborn child.
What is the melting point of di-Sodium tetraborate anhydrous 99.99 Suprapur®?
The melting point is 742 °C and the boiling point is No information available..