Sodium pyruvate

Allow the victim to rest in a well ventilated area.

After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. Wash contaminated clothing before reusing. For serious skin contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream.

Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used.

Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation.

SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam.

Do not use water jet.

May be combustible at high temperature.

SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.

Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not breathe dust. Avoid contact with skin. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when possible.

Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents.

Avoid contact with skin. Wear suitable protective clothing.

Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood.

Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Gloves.

Safety glasses. Splash goggles (in case of a large spill).

Dust respirator. Be sure to use an approved/certified respirator or equivalent. A self contained breathing apparatus should be used to avoid inhalation of the product in case of a large spill.

Lab coat. Full suit and boots (in case of a large spill).

The product is stable.

Not available

Polymerization: No

Not available

Not available