NextSDS Logo
Safety Data Sheet EN

Natamycin

CAS 7681-93-8

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Natamycin
Product Code
AC131220000; AC131220200; AC131220250; AC131220010; AC131220050
Synonyms
Pimaricin; Pimafucin

Regulatory Identifiers

CAS Number
7681-93-8 Check regulations →

Identified Uses

Laboratory chemicals.

Uses advised against

Not for food, drug, pesticide or biocidal product use

Manufacturers & Suppliers

F

Fisher Scientific

distributor

One Reagent Lane, Fair Lawn, NJ 07410

(201) 796-7100

A

Acros Organics

manufacturer

One Reagent Lane, Fair Lawn, NJ 07410

Emergency Contacts

Fisher Scientific

001-800-ACROS-01

Fisher Scientific

+32 14 57 52 11

Fisher Scientific

001-201-796-7100

Fisher Scientific

+32 14 57 52 99

CHEMTREC

001-800-424-9300

CHEMTREC

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Pimaricin 7681-93-8 88% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Skin contact

Wash off immediately with plenty of water for at least 15 minutes.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

Clean mouth with water and drink afterwards plenty of water.

Immediate Medical Attention

Get medical attention. Get medical attention immediately if symptoms occur.

Medical Treatment

Treat symptomatically

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable media

No information available

Specific hazards

Keep product and empty container away from heat and sources of ignition.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Should not be released into the environment. See Section 12 for additional ecological information.

Cleanup methods

Sweep up or vacuum up spillage and collect in suitable container for disposal.

Materials: suitable container

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Avoid ingestion and inhalation. Avoid dust formation.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from light.

Hygiene

Avoid contact with skin, eyes and clothing. Avoid ingestion and inhalation.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

None under normal use conditions.

Hands

Wear appropriate protective gloves

Eyes

Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.

Respiratory

No protective equipment is needed under normal use conditions.

Skin/Body

Wear appropriate protective clothing to prevent skin exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour
---
Odor Threshold
No information available
Melting Point
No data available
Freezing Point
---
Physical State
Powder Solid
Solubility
insoluble
Relative Evaporation Rate
---
Density
---
Softening Point
---
Vapor Pressure
No information available
State Under Standard Conditions
---
Flash Point
> 110 °C / > 230 °F
Ph
No information available
Auto Ignition Temperature
Not applicable
Solubility In Water
---
Lower Explosive Limit
No data available
Colour Intensity
---
Partition Coefficient
No data available
Odor
No information available
Vapor Density
Not applicable
Cloud Point
---
Crystallisation Point
---
Bulk Density
---
Decomposition Temperature
No information available
Evaporation Rate
Not applicable
Voc Content
---
Dynamic Viscosity
---
Solidification Point
---
Physical State Data
solid
Molecular Weight
665.73
Relative Density
No information available
Explosive Limits
---
Form
---
Boiling Point
No information available
Properties Status
---
Flammability
No information available
Upper Explosive Limit
No data available
Solubility In Fat
---
Appearance
White
Metal Corrosion
---
Kinematic Viscosity
Not applicable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Light sensitive.

Reactivity

None known, based on information available

Hazardous reactions

None under normal processing.

Avoid

Incompatible products. Excess heat. Avoid dust formation. Exposure to light.

Incompatible

Strong oxidizing agents

Decomposition

Carbon monoxide (CO), Carbon dioxide (CO2), Nitrogen oxides (NOx)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Natamycin known by?

Natamycin is also known as: Pimaricin; Pimafucin

What is the hazard signal word for Natamycin?

The signal word is no signal word.

What is the physical form of Natamycin?

Natamycin is a powder solid appearing as white . It has no information available odor.

What is the solubility of Natamycin?

insoluble

What is Natamycin used for?

Laboratory chemicals.

What is the melting point of Natamycin?

The melting point is No data available and the boiling point is No information available.