Tectyl™ 506

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.

Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention.

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. If eye irritation persists: Get medical advice/attention.

Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting. If symptoms persist: Get medical advice/attention.

Alcohol resistant foam, BC-powder, Carbon dioxide (CO2), Dry sand

Water jet

In case of insufficient ventilation and/or in use, may form flammable/explosive vapour-air mixture. Solvent vapours are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures.

Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

Remove persons to safety.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder

Materials: sawdust, kieselgur (diatomite), sand, universal binder

Use local and general ventilation. Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Use only in well-ventilated areas. Due to danger of explosion, prevent leakage of vapours into cellars, flues and ditches. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.

Keep container tightly closed and in a well-ventilated place. Keep cool. Protect from sunlight.

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge.

General ventilation.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Type of material: CR: chloroprene (chlorobutadiene) rubber

Wear eye/face protection.

In case of inadequate ventilation wear respiratory protection.

Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

See below "Conditions to avoid".

The mixture contains reactive substance(s). Risk of ignition. If heated: Risk of ignition

No known hazardous reactions.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge.

Oxidisers

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.

Solvent reclamation/regeneration.

Provisions for dangerous goods (ADR) should be complied within the premises.