Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TH-18 E, S1018 E
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- NS00-Q0YM-200Y-SD4X
Identified Uses
Printing Ink
Uses advised against
No additional information available
Manufacturers & Suppliers
Hitachi Europe GmbH
manufacturer
Niederkasseler Lohweg 191 40547 Duesseldorf Germany
+49 (0) 211-5283-639
Emergency Contacts
GBK GmbH
+49 - (0) 6132 - 84463
24h - 7d/w - 365d/a
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Symptoms: May cause drowsiness or dizziness.
Rinse skin with water/shower. Take off immediately all contaminated clothing.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Eye irritation.
Call a poison center or a doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Highly flammable liquid and vapour.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. No open flames, no sparks, and no smoking. Avoid breathing Vapours. Avoid contact with skin and eyes.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Use only outdoors or in a well-ventilated area. Avoid breathing Vapours. Avoid contact with skin and eyes.
Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves resistant to chemicals made off butyl, minimum coat thickness 0,7 mm, permeation resistance (wear duration) approx. 480 minutes, i.e. protective glove <Butoject 898> made by www.kcl.de. This recommendation refers exclusively to the chemical compatibility and the lab test conforming to EN 374 carried out under lab conditions. Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the recommendations given by the manufacturer of protective gloves
Tightly fitting goggles (EN 166). Eyewash bottle with clean water (EN 15154)
In case of insufficient ventilation wear suitable respiratory equipment (gas filter type A) (EN 14387).
Long sleeved protective clothing (DIN EN ISO 6530)
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Highly flammable liquid and vapour.
No dangerous reactions known under normal conditions of use.
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1210
- Shipping Name
- PRINTING INK
- Transport Class
- 3
- Packing Group
- II
163, 367
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TH-18 E, S1018 E?
The signal word is danger.
What is the physical form of TH-18 E, S1018 E?
TH-18 E, S1018 E is a liquid with clear color. It has solvent-like odor.
What is TH-18 E, S1018 E used for?
Printing Ink
What are the hazard statements for TH-18 E, S1018 E?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of TH-18 E, S1018 E?
The melting point is Not available and the boiling point is 80 °C.