NextSDS Logo
Safety Data Sheet EN

MULTIFOAM FS

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MULTIFOAM FS

Regulatory Identifiers

CAS Number
N/A
REACH No.
Not applicable (mixture)

Identified Uses

Detergent according to Regulation (EC) No 648/2004

Uses advised against

No uses advised against known

Manufacturers & Suppliers

N

Novatio

national supplier

Industrielaan 5B, B-2250 Olen

+32 14 25 76 40

N

Novatech International N.V.

manufacturer

Industrielaan 5B, B-2250 Olen

+32 14 85 97 37

Emergency Contacts

BIG

+32 14 58 45 45

24h/24h

EN, FR, DE, NL

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122°F.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
butane EC: 203-448-7 106-97-8 8% Yes
propane EC: 200-827-9 74-98-6 5% Yes
2-butoxyethanol EC: 203-905-0 111-76-2 5% Yes
ammonia EC: 215-647-6 1336-21-6 0.2% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim into fresh air. In case of respiratory problems, consult a doctor/medical service.

Symptoms: No effects known.

Skin contact

If possible, wipe up/dry remove chemical. Then rinse/shower immediately with (lukewarm) water.

Symptoms: No effects known.

Eye contact

Rinse immediately with (lukewarm) water. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, consult a doctor/medical service.

Symptoms: No effects known.

Ingestion

Rinse mouth with water. If you feel unwell, consult a doctor/medical service. Do not wait for symptoms to occur to consult Poison Center.

Symptoms: No effects known.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Small fire: Water, Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting CO2 extinguisher. Major fire: Quantities of water.

Specific hazards

Pressurised container: May burst if heated.

Instructions

If exposed to fire cool the closed containers by spraying with water. Physical explosion risk: extinguish/cool from behind cover. Do not move the load if exposed to heat.

Firefighter Protection

Gloves (EN 374). Protective clothing (EN 14605 or EN 13034). Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Exposure to fire/heat: have neighbourhood close doors and windows.

Environmental

Dam up the liquid spill.

Cleanup methods

Scoop absorbed substance into closing containers. Clean contaminated surfaces with an excess of water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Gas/vapour heavier than air at 20°C.

Storage

Storage temperature: < 50 °C. Meet the legal requirements. Protect against frost. Keep out of direct sunlight. Keep container in a well-ventilated place. Fireproof storeroom.

Hygiene

Observe normal hygiene standards.

Fire prevention

Keep away from naked flames/heat. Keep away from ignition sources/sparks.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Measure the concentration in the air regularly.

Hands

Protective gloves against chemicals (EN 374). Materials: nitrile rubber, Measured breakthrough time: >480 minutes, Thickness: 0.35 mm, Protection index: Class 6

Eyes

Safety glasses (EN 166).

Respiratory

Full face mask with filter type A at conc. in air > exposure limit.

Skin/Body

Protective clothing (EN 14605 or EN 13034).

Environmental

See sections 6.2, 6.3 and 13

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
1 mPa.s ; 20 °C ; Liquid
Cloud Point
---
Molecular Weight
---
Relative Density
1.00 ; 20 °C ; Liquid
Voc Content
---
Explosive Limits
---
Colour Intensity
---
Lower Explosive Limit
1.13 vol % ; Propellant
Metal Corrosion
---
Crystallisation Point
---
Vapor Density
---
Vapor Pressure
8530 hPa ; 20 °C ; Propellant
Evaporation Rate
1.3 ; Butyl acetate ; Liquid
Odor Threshold
No data available in the literature
Form
---
Partition Coefficient
Not applicable (mixture)
Flash Point
Not applicable (aerosol)
Ph
11.1
Solubility In Fat
---
Auto Ignition Temperature
Not applicable (aerosol)
Properties Status
---
Solubility In Water
---
Colour
Colourless
State Under Standard Conditions
---
Odor
Characteristic odour
Melting Point
No data available in the literature
Solubility
Water ; soluble ; Liquid
Upper Explosive Limit
12 vol % ; Propellant
Bulk Density
---
Density
1001 kg/m³ ; 20 °C ; Liquid
Physical State Data
aerosol
Solidification Point
---
Decomposition Temperature
No data available in the literature
Physical State
Aerosol
Boiling Point
-42 °C - 173 °C
Softening Point
---
Kinematic Viscosity
1 mm²/s ; 40 °C ; Liquid
Relative Evaporation Rate
---
Freezing Point
---
Appearance
---
Flammability
Extremely flammable aerosol.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

May be ignited by sparks. Gas/vapour spreads at floor level: ignition hazard. Basic reaction.

Hazardous reactions

No data available.

Avoid

Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks.

Incompatible

No data available.

Decomposition

Upon combustion: formation of CO, CO2 and small quantities of nitrous vapours.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
aerosols
IMDG

190, 277, 327, 344, 381, 63, 959

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MULTIFOAM FS?

The signal word is danger.

What is the physical form of MULTIFOAM FS?

MULTIFOAM FS is a aerosol with colourless color. It has characteristic odour odor.

What is the solubility of MULTIFOAM FS?

Water ; soluble ; Liquid

What is MULTIFOAM FS used for?

Detergent according to Regulation (EC) No 648/2004

What are the hazard statements for MULTIFOAM FS?

This substance has 2 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.

What is the melting point of MULTIFOAM FS?

The melting point is No data available in the literature and the boiling point is -42 °C - 173 °C.