Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MULTISOL
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 6750-R0SP-P00J-R6J4
Identified Uses
Main use category : Industrial use, Professional use Industrial/Professional use spec : Industrial For professional use only
Uses advised against
No additional information available
Manufacturers & Suppliers
ROCOL a division of ITW Ltd
manufacturer
Rocol House, Wakefield Rd, Swillington, LS26 8BS Leeds - United Kingdom
+44 (0)113 232 2600
http://www.rocol.com
Emergency Contacts
Emergency Contact
+44 (0)113 232 2600
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ALKOXYAMINE EC: 203-868-0 | 111-42-2 | 2.4 - 5% | Yes |
| ALKENYL ALKANOL AMIDE EC: 271-653-9 | 68603-38-3 | 2.4 - 5% | Yes |
| ALCOHOLS C16-C18, C18-UNSATURATED, ETHOXYLATED EC: 500-236-9 | 68920-66-1 | 2.4 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air. Allow the victim to rest.
Wash with plenty of water/... Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. Specific treatment (see supplemental first aid instruction on this label).
Symptoms: Causes skin irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
Symptoms: Causes serious eye damage.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters. Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.
Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use.
Wash hands, forearms and face thoroughly after handling. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective gloves.
Chemical goggles or safety glasses
Wear appropriate mask
Wear suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not established.
No additional information available
Not established.
Direct sunlight. Extremely high or low temperatures.
Strong acids. Strong bases.
fume. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MULTISOL?
The signal word is danger.
What is the physical form of MULTISOL?
MULTISOL is a liquid with gold. color. It has characteristic odour. odor.
What is the solubility of MULTISOL?
No data available
What is MULTISOL used for?
Main use category : Industrial use, Professional use Industrial/Professional use spec : Industrial For professional use only
What are the hazard statements for MULTISOL?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of MULTISOL?
The melting point is No data available and the boiling point is 100 °C.