Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Amsol EMB
- Product Form
- Mixture
- Product Code
- SD080
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Exempted (according to Annex V.9)
Identified Uses
Main use category : Industrial use Use of the substance/mixture : Liquid soap of C12-C18 saturated and C18 unsaturated fatty acids
Uses advised against
No uses advised against
Manufacturers & Suppliers
s.a. GOVI n.v.
manufacturer
Landegemstraat 8, B-9031 Drongen - België-Belgique-Belgium
+32 (0)9 282 94 95
http://www.govi.com
Emergency Contacts
BIG
+32 (0)14/58 45 45
24h/24h
EN, DE, NL, FR
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Not applicable.
Symptoms: No important effect or critical danger known.
Wash immediately with plenty of water. If skin irritation occurs: Get medical advice/attention.
Symptoms: Mild skin irritation.
Rinse immediately with plenty of water, also under eyelids, taking contact lenses off. If irritation persists, consult a doctor.
Symptoms: Causes serious eye irritation.
Rinse mouth. Not toxic. Immediately give plenty of water.
Symptoms: No important effect or critical danger known.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. In case of fire in the immediate vicinity, any kind of extinguisher can be used: foam, sand, carbon dioxide (CO2), water.
Explosion hazard : Not applicable.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Stop leak without risks if possible. Prevent product from entering drains. Use appropriate precautions to avoid environmental contamination. Do not contaminate ground and surface water.
Clean up any spills as soon as possible, using an absorbent material to collect it. Flush with plenty of water. Spill area may be slippery.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
n-Amyl acetate EMPLURA®
CAS: 628-63-7
AMOLIT®
CAS: 1317-65-3
Ethanolamine for analysis EMSURE®
CAS: 141-43-5
EMBACRYL
---
Ammonium acetate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 631-61-8
AMMONIUM IRON(III) SULFATE DODECAHYDRATE FOR ANALYSIS EMSURE® ACS,ISO,REAG. PH EUR
CAS: 7783-83-7
Dimethyl sulfoxide for analysis EMSURE® ACS
CAS: 67-68-5
Ammonium fluoride for analysis EMSURE® ACS
CAS: 12125-01-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No additional information available
Protect from freezing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant PVC/Nitrilrubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.
Safety glasses with side-shields (EN 166).
No personal breathing protective equipment is normally required.
No special protection required. Safety shoes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling and storage conditions.
The product is stable at normal handling and storage conditions.
None under normal conditions.
Freezing.
None to our knowledge.
Hazardous decomposition products may be released during prolonged heating like smokes, carbon monoxide and dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Amsol EMB?
The signal word is warning.
What is the physical form of Amsol EMB?
Amsol EMB is a liquid appearing as liquid. with light brown. color. It has soap-like. odor.
What is the solubility of Amsol EMB?
Water: Unlimited
What is Amsol EMB used for?
Main use category : Industrial use Use of the substance/mixture : Liquid soap of C12-C18 saturated and C18 unsaturated fatty acids
What are the hazard statements for Amsol EMB?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of Amsol EMB?
The melting point is No data available and the boiling point is ± 100 °C.