NextSDS Logo
Safety Data Sheet EN

Sealapex Xpress Base and Catalyst

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sealapex Xpress Base and Catalyst
Product Form
Paste

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Dental product: Endodontic Obturation Systems and Fill Products; Professional applications.

Manufacturers & Suppliers

S

SybronEndo Endodontics

manufacturer

1717 West Collins Avenue, Orange, CA 92867-5422

1-800-KERR-123

Emergency Contacts

CHEMTREC®

1-800-424-9300

24 hours

CHEMTREC®

+1-703-527-3887

24 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P264 Wash hands thoroughly after handling.
P280 Wear protective gloves.
P282 Wear eye or face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P310 Immediately call a POISON CENTER or physician.
P332 + P313 If skin irritation occurs: Get medical attention.
P338 Remove contact lenses, if present and easy to do.
P338 Continue rinsing.
P351 IF IN EYES: Rinse cautiously with water for several minutes.
P362 Take off contaminated clothing.
P363 Wash contaminated clothing before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
N-ethyl-o(or p)-toluenesulphonamide 8047-99-2 10 - 30% No
Calcium oxide 1305-78-8 10 - 30% No
isobutyl salicylate 87-19-4 1 - 5% No
zinc oxide 1314-13-2 1 - 5% No

Notes

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health and hence require reporting in this section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

No special measures required. If inhaled, remove to fresh air. Get medical attention if symptoms occur.

Symptoms: May give off gas, vapor or dust that is very irritating or corrosive to the respiratory system. Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure. No specific data.

Skin contact

No special measures required. In case of contact, immediately flush skin with plenty of water. Get medical attention if symptoms occur.

Symptoms: Causes skin irritation. Adverse symptoms may include the following: pain or irritation, redness, blistering may occur.

Eye contact

No special measures are required. In case of contact with eyes, rinse immediately with plenty of water. Get medical attention if symptoms occur.

Symptoms: Causes serious eye damage. Adverse symptoms may include the following: pain, watering, redness.

Ingestion

Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Get medical attention if adverse health effects persist or are severe.

Symptoms: Corrosive to the digestive tract. Causes burns. May cause burns to mouth, throat and stomach. Adverse symptoms may include the following: stomach pains.

Immediate Medical Attention

Get medical attention if symptoms occur. In case of inhalation of decomposition products in a fire, symptoms may be delayed.

Medical Treatment

No specific treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use an extinguishing agent suitable for the surrounding fire.

Unsuitable media

Do not use water jet.

Specific hazards

In a fire or if heated, a pressure increase will occur and the container may burst.

Instructions

In case of major fire and large quantities: Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Low release. For professional use only. Handling of product in very small amounts or in situations where release is highly unlikely

Small spill

Small Quantity. For professional use only. Absorb with an inert material and place in an appropriate waste disposal container.

Large spill

Small Quantity. For professional use only. Absorb with an inert material and place in an appropriate waste disposal container.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Absorb with an inert material and place in an appropriate waste disposal container.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special measures are required for small quantities under normal and intended conditions of product use. For professional use only. Put on appropriate personal protective equipment (see Section 8). Handle with care and dispose in a safe manner.

Storage

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Vapor Pressure
Not available.
Solubility In Fat
---
Evaporation Rate
Not available.
Cloud Point
---
Properties Status
---
Odor
Odorless.
Freezing Point
---
Upper Explosive Limit
Not available.
Auto Ignition Temperature
Not available.
Boiling Point
Not available.
Lower Explosive Limit
Not available.
Physical State Data
liquid
Odor Threshold
Not available.
Softening Point
---
Molecular Weight
---
Metal Corrosion
---
Kinematic Viscosity
Not available.
Form
---
Bulk Density
---
Ph
Not available.
Flammability
Not applicable.
Melting Point
Not available.
Partition Coefficient
Not available.
Colour
Off-white.
Flash Point
Not available.
Crystallisation Point
---
State Under Standard Conditions
---
Decomposition Temperature
Not available.
Density
---
Relative Density
1.3 [Water = 1]
Solubility
Insoluble in the following materials: cold water and hot water.
Appearance
---
Dynamic Viscosity
Not available.
Explosive Limits
---
Solidification Point
---
Solubility In Water
Not available.
Relative Evaporation Rate
---
Vapor Density
Not available.
Physical State
Liquid. [Paste.]
Voc Content
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur. Under normal conditions of storage and use, hazardous polymerization will not occur.

Avoid

No specific data.

Incompatible

No specific data.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sealapex Xpress Base and Catalyst?

The signal word is danger.

What is the physical form of Sealapex Xpress Base and Catalyst?

Sealapex Xpress Base and Catalyst is a liquid. [paste.] with off-white. color. It has odorless. odor.

What is the solubility of Sealapex Xpress Base and Catalyst?

Insoluble in the following materials: cold water and hot water.

What is Sealapex Xpress Base and Catalyst used for?

Dental product: Endodontic Obturation Systems and Fill Products; Professional applications.

What are the hazard statements for Sealapex Xpress Base and Catalyst?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.

What is the melting point of Sealapex Xpress Base and Catalyst?

The melting point is Not available. and the boiling point is Not available..