Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INTERCEPT PLUS Detergent
- Product Code
- ML02-0145
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Professional use Use of the substance/mixture : Medical Device Cleaning Detergent
Uses advised against
No additional information available
Manufacturers & Suppliers
Cantel Medical (UK) Limited
manufacturer
Wollseley House, Staffordshire Technology Park, Beaconside, Stafford ST18 0GA, United Kingdom
+44 (0) 1785.782420
Medivators BV
distributor
Sourethweg 11, 6422PC Heerlen - Netherlands
(31) 45 5 471 471
Emergency Contacts
CHEMTREC
+1 703-741-5500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical advice/attention.
Symptoms: May be harmful if inhaled. Irritating to respiratory system.
In case of contact, immediately flush skin with plenty of water. Remove/Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Get immediate medical advice/attention.
Symptoms: Causes severe skin burns. Symptoms may include redness, pain, blisters.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lenses, if worn. Get immediate medical advice/attention.
Symptoms: Causes serious eye damage. Symptoms may include discomfort or pain, excess blinking and tear production, with marked redness and swelling of the conjunctiva. May cause burns.
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth. Get immediate medical advice/attention.
Symptoms: May be harmful if swallowed. May cause stomach distress, nausea or vomiting. May cause burns to the linings of the mouth, throat, and gastrointestinal tract.
Immediate Medical Attention
Get immediate medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Treat for surrounding material.
None known.
Fire hazard
Keep upwind of fire.
Firefighter Protection
Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Keep out of drains, sewers, ditches, and waterways. Minimize use of water to prevent environmental contamination.
Scoop up material and place in a disposal container.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get in eyes, on skin, or on clothing. Do not breathe gas/mist/vapours/spray. Do not swallow. Handle and open container with care. When using do not eat, drink or smoke.
Keep out of the reach of children. Keep container tightly closed.
Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure limits.
Wear chemically resistant protective gloves.
Wear approved eye protection (properly fitted dust- or splash-proof chemical safety goggles) and face protection (face shield).
In case of inadequate ventilation wear respiratory protection. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Wear suitable protective clothing.
Maintain levels below Community environmental protection thresholds.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
Heat. Incompatible materials.
Acids
May include, and are not limited to: oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3266
- Shipping Name
- CORROSIVE LIQUID, BASIC, INORGANIC, N.O.S.(Phosphates solution)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INTERCEPT PLUS Detergent?
The signal word is danger.
What is the physical form of INTERCEPT PLUS Detergent?
INTERCEPT PLUS Detergent is a liquid. appearing as clear. with colourless. color. It has low odour. odor.
What is the solubility of INTERCEPT PLUS Detergent?
No data available
What is INTERCEPT PLUS Detergent used for?
Main use category : Professional use Use of the substance/mixture : Medical Device Cleaning Detergent
What are the hazard statements for INTERCEPT PLUS Detergent?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of INTERCEPT PLUS Detergent?
The melting point is No data available and the boiling point is No data available.