Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INTERCEPT Detergent
- Product Code
- ML02-0134/ML02-0133
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning of Immersible Medical Equipment
Uses advised against
No additional information available.
Manufacturers & Suppliers
Medivators BV
manufacturer
Sourethweg 11, 6422PC Heerlen, Netherlands
(31) 45 5 471 471
Emergency Contacts
CHEMTREC
(800) 424-9300
CHEMTREC International
+1 (703) 527-3887
24 hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzalkonium chloride EC: 269-919-4 | 68391-01-5 | 4.8% | Yes |
| Lactic Acid EC: 201-196-2 | 79-33-4 | 1.4% | Yes |
| Alkyl polyglycoside EC: 500-220-1 | 68515-73-1 | 1.4% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell.
Symptoms: May cause respiratory tract irritation.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Call a physician if irritation develops and persists.
Symptoms: Causes skin irritation. Symptoms may include redness, edema, drying, defatting and cracking of the skin.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lenses, if worn. If irritation persists, get medical attention.
Symptoms: Causes serious eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with marked redness and swelling of the conjunctiva.
If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell.
Symptoms: May be harmful if swallowed. May cause stomach distress, nausea or vomiting.
Immediate Medical Attention
In case of accident or if you feel unwell, seek medical advice immediately (show the label or SDS where possible).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Treat for surrounding material.
None known.
Fire hazard: Products of combustion may include, and are not limited to: oxides of carbon.
Firefighter Protection
Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Relevant water authorities should be notified of any large spillage to water course or drain.
Scoop up material and place in a disposal container.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid breathing vapour or mist. Do not swallow. Handle and open container with care. When using do not eat, drink or smoke.
Keep out of the reach of children. Keep container tightly closed.
Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure limits.
Wear chemically resistant protective gloves.
Wear eye protection.
In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Wear suitable protective clothing.
Maintain levels below Community environmental protection thresholds.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
Heat.
None known.
May include, and are not limited to: oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Do not handle until all safety precautions have been read and understood.
Do not handle until all safety precautions have been read and understood.
Do not handle until all safety precautions have been read and understood.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INTERCEPT Detergent?
The signal word is warning.
What is the physical form of INTERCEPT Detergent?
INTERCEPT Detergent is a liquid appearing as no data available with blue color. It has cotton fresh odor.
What is the solubility of INTERCEPT Detergent?
No data available
What is INTERCEPT Detergent used for?
Cleaning of Immersible Medical Equipment
What are the hazard statements for INTERCEPT Detergent?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of INTERCEPT Detergent?
The melting point is No data available and the boiling point is 100 °C (212 °F).