Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aniosgel 85 NPC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfection of healthy skin. For further information on product indication, please see the label.
Manufacturers & Suppliers
Laboratoires Anios
manufacturer
Pave du Moulin 59260 Lille- Hellemmes France
Angelini Pharma Inc.
distributor
8322 Helgerman Court Gaithersburg, MD 20877, USA
(301) 330-7597
Emergency Contacts
Angelini Pharma Inc.
(301) 330-7597
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the person away from the place of exposure and take him/her outside.
If applicable, remove contact lenses. Wash thoroughly with soft clean water for 15 minutes, holding the eyelids open.
Symptoms: redness, pain or visual impairment
Rinse out the mouth, do not induce vomiting, keep the person calm and take him/her to a clinic or a doctor’s. Show the container or label.
Immediate Medical Attention
If there is any redness, pain or visual impairment, consult an ophthalmologist. Show this container or label. Take him/her to a clinic or a doctor’s.
Medical Treatment
Refer to the recommendation of the doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use powder or foam extinguishers. Special foams for polar liquids, powders and carbon dioxide.
water jet
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8. Keep away any unprotected person. Move all flammable sources out of danger and keep them away from the scene. Eliminate any possible source of ignition and ventilate the premises.
Do not get rid in natural spaces (waterways, ground and vegetation, etc.)
Absorb any spilled product with absorbent non-combustible materials, and sweep away or remove with a shovel. Wash the contaminated surface thoroughly with water.
Materials: absorbent non-combustible materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Product for external use - do not swallow. Handle in accordance with user instructions on label.
Keep packages tightly closed and away from sources of heat, sparks and naked flames. Do not use tools which may produce sparks. Do not smoke. Keep away from flammable materials. Keep away from sources of ignition - no smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture is stable under the recommended handling and storage conditions in section 7.
No hazardous reaction if the instructions/indications for storage and handling are respected.
Cf. § 10.1 and 10.2
Avoid exposure to heat.
Do not mix with other products. Keep away from combustible material
At high temperatures, dangerous decomposition products may be produced, such as fumes, carbon dioxide and carbon monoxide, nitrogen oxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1170
- Shipping Name
- ETHANOL SOLUTION (ETHYL ALCOHOL SOLUTION)
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aniosgel 85 NPC?
The signal word is danger.
What is the physical form of Aniosgel 85 NPC?
Aniosgel 85 NPC is a viscous liquid with colorless color. It has typical of alcohol odor.
What is Aniosgel 85 NPC used for?
Disinfection of healthy skin. For further information on product indication, please see the label.
What are the hazard statements for Aniosgel 85 NPC?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapor.
- H319: Causes serious eye irritation.
What is the melting point of Aniosgel 85 NPC?
The melting point is Not specified and the boiling point is > 35°C.