Coured Plates

Move to fresh air.

Wash off immediately with plenty of water for at least 15 minutes.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Clean mouth with water and drink afterwards plenty of water.

Symptoms: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

No information available.

Thermal decomposition can lead to release of irritating gases and vapors

Ensure adequate ventilation. Use personal protective equipment.

Should not be released into the environment.

Sweep up or vacuum up spillage and collect in suitable container for disposal.

Materials: suitable container

Wear personal protective equipment. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Avoid ingestion and inhalation.

Keep containers tightly closed in a dry, cool and well-ventilated place.

Avoid contact with skin, eyes and clothing. Avoid ingestion and inhalation.

Ensure adequate ventilation, especially in confined areas. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source.

Protective gloves. Glove material: Disposable gloves. Breakthrough time: See manufacturers recommendations. Glove thickness: -. EU standard: EN 374. Glove comments: (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information). Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.

If splashes are likely to occur, wear: Safety glasses with side-shields (European standard - EN 166)

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. Large scale/emergency use: In case of insufficient ventilation wear suitable respiratory equipment. Small scale/Laboratory use: Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. When RPE is used a face piece Fit Test should be conducted.

Long sleeved clothing

No information available.

Stable under normal conditions.

None known, based on information available.

Hazardous polymerization does not occur. None under normal processing.

Incompatible products, Excess heat, Avoid dust formation.

None known

None under normal use conditions