NextSDS Logo
Safety Data Sheet EN

POURED PLATES

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
POURED PLATES
Product Code
EP, PB, PO

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals.

Uses advised against

No Information available

Manufacturers & Suppliers

O

Oxoid Deutschland GmbH

manufacturer

Postfach 10 07 53, D-46467, Wesel, GERMANY

+49 (0) 281 1520

O

Oxoid Ltd.

distributor

Wade Road, Basingstoke, Hants, UK, RG24 8PW

+44 (0) 1256 841144

Emergency Contacts

Carechem 24

+44 (0) 1865 407333

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
NONHAZARDOUS --- 100% No

Full text of Hazard Statements: see section 16

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Get medical attention immediately if symptoms occur.

Skin contact

Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.

Symptoms: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea

Immediate Medical Attention

Get medical attention immediately if symptoms occur.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable media

No information available.

Specific hazards

Thermal decomposition can lead to release of irritating gases and vapors.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Should not be released into the environment. See Section 12 for additional ecological information.

Cleanup methods

Sweep up or vacuum up spillage and collect in suitable container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Avoid ingestion and inhalation.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing before re-use. Wash hands before breaks and at the end of workday.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source

Hands

Protective gloves. Glove material: Disposable gloves. Breakthrough time: See manufacturers recommendations. EU standard: EN 374. Glove comments: (minimum requirement)

Eyes

Safety glasses with side-shields (European standard - EN 166)

Respiratory

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. In case of insufficient ventilation wear suitable respiratory equipment. Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. When RPE is used a face piece Fit Test should be conducted

Skin/Body

Long sleeved clothing

Environmental

No information available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Metal Corrosion
---
Relative Evaporation Rate
---
Lower Explosive Limit
---
Kinematic Viscosity
---
Freezing Point
---
Appearance
Multiple Colors
Melting Point
No data available
Relative Density
---
Flash Point
Not applicable
State Under Standard Conditions
---
Form
---
Solidification Point
---
Explosive Limits
---
Odor
No information available
Bulk Density
No data available
Solubility
---
Auto Ignition Temperature
---
Odor Threshold
No data available
Partition Coefficient
---
Vapor Pressure
No data available
Upper Explosive Limit
---
Cloud Point
---
Decomposition Temperature
No data available
Boiling Point
Not applicable
Physical State
Solid
Softening Point
---
Evaporation Rate
Not applicable
Molecular Weight
---
Ph
No information available
Physical State Data
solid
Crystallisation Point
---
Solubility In Fat
---
Dynamic Viscosity
---
Colour Intensity
---
Solubility In Water
No information available
Flammability
No information available
Colour
---
Density
No data available
Vapor Density
Not applicable
Voc Content
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions

Reactivity

None known, based on information available

Hazardous reactions

Hazardous polymerization does not occur. None under normal processing.

Avoid

Incompatible products. Excess heat. Avoid dust formation.

Incompatible

None known.

Decomposition

None under normal use conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Ecotoxicity effects Contains no substances known to be hazardous to the environment or that are not degradable in waste water treatment plants.

Contains no substances known to be hazardous to the environment or that are not degradable in waste water treatment plants.

12.2. Persistence and degradability

Not applicable for mixtures

Not applicable for mixtures

12.3. Bioaccumulative potential

No information available

12.4. Mobility in soil

No information available

12.5. Results of PBT and vPvB assessment

No data available for assessment.

No data available for assessment.

12.6. Other adverse effects

Endocrine Disruptor Information This product does not contain any known or suspected endocrine disruptors Persistent Organic Pollutant This product does not contain any known or suspected substance Ozone Depletion Potential This product does not contain any known or suspected substance

The product does not contain any known or suspected endocrine disruptors, persistent organic pollutants, or substances with ozone depletion potential.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification.

Disposal

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.

Waste Codes

Waste codes are not product specific, but application specific. EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The product is classified and labeled according to EC directives or corresponding national laws. The product is classified and labeled in accordance with Directive 1999/45/EC.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for POURED PLATES?

The signal word is no signal word.

What is the physical form of POURED PLATES?

POURED PLATES is a solid appearing as multiple colors . It has no information available odor.

What is POURED PLATES used for?

Laboratory chemicals.

What is the melting point of POURED PLATES?

The melting point is No data available and the boiling point is Not applicable.